Programme 1
I N |
| OUT MODE |
1 – – – | ~ | |
2~
3~
4~
5~
6~
7~
8~
| T I ME CODE | – |
| ||
|
| TOTAL | 0 0 | : 0 0 |
|
|
|
| – |
|
|
|
|
|
|
| |
|
|
|
|
| |
|
| SYNCHRO | O . 1 | ||
|
|
|
|
|
|
|
|
|
|
|
|
Random Assemble Editing Menu
VIDEO Menu
EN49
For More Accurate Editing
Some VCRs make the transition from
DIAGNOSING VCR/CAMCORDER TIMING
1 Play back the tape in the camcorder, then point the remote control at the camcorder’s remote sensor and press ON/OFF.
The Random Assemble Editing Menu appears.
2 Perform Random Assemble Editing on Programme 1 only. In order to check VCR and camcorder timing, select the beginning of a scene transition as your Edit- In point.
Remote sensor
ON/OFF
(optional)
NOTES:
●Before performing actual Random Assemble Editing, do a few Random Assemble Editing trial runs to check whether the value you have input is appropriate or not, and make adjustments accordingly.
●Depending on the recorder, there may be situations where the timing difference cannot be fully corrected.
3 Play back the dubbed scene.
•If any images from the scene prior to the transition you chose for your
•If the scene you tried to dub starts in progress, the VCR is slow to start recording.
ADJUSTMENT OF VCR/CAMCORDER TIMING
4 Point the remote control at the camcorder’s remote sensor and press ON/OFF to make the Random Assemble Editing menu disappear, then press the MENU/BRIGHT wheel in. The Menu Screen appears.
5 Rotate the MENU/BRIGHT wheel to select “ 
VIDEO” and push it. The VIDEO Menu appears. Then, rotate it to “SYNCHRO” and push it. The value for “SYNCHRO” is highlighted.
6 Based on the diagnostics performed, you can now advance the VCR’s record timing by rotating the MENU/BRIGHT wheel towards “+”. You can also delay the VCR’s record timing by rotating the MENU/ BRIGHT wheel towards
7 Rotate the MENU/BRIGHT wheel to select “1RETURN” and push it twice.
Now perform Random Assemble Editing beginning with step 4 on page 47.
