Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

1 Make sure all units are turned off.

2 Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 22).

If using a VCR . . . go to step 3.

If not . . . go to step 4.

3

4 Turn on the camcorder, the VCR and the TV.

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

To choose whether or not the following displays appear on the connected TV . . .

Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF”

in the Menu Screen ( pg. 38).

Time Code

.... set “TIME CODE” to “ON” or “OFF” in the

Menu Screen ( pg. 38).

Playback Sound Mode, Tape Speed And Tape Running Displays for video playback

.... set “ON SCREEN” to “LCD” or “LCD/TV” in the Menu Screen ( pg. 38).

EN23

NOTES:

It is recommended to use the AC Adapter as the

power supply instead of the battery pack (  pg. 9).

To monitor the picture and sound from the

camcorder without inserting a tape, set the camcorder’s Power Switch to “” or “ ”, then set your TV to the appropriate input mode.

Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

Page 23
Image 23
JVC GRDVL140 specifications EN23, If using a VCR . . . go to step If not . . . go to step