EN59

SYMPTOM

 

POSSIBLE CAUSES

 

CORRECTIVE ACTION

 

 

32. The LCD monitor image is

 

32. • During playback of the

 

32.

 

 

distorted.

 

unrecorded portion, High-

 

 

 

 

 

 

speed Search and still

 

————

 

 

 

 

playback, LCD monitor

 

 

 

 

 

 

 

 

 

 

indications appear distorted.

 

 

 

 

 

 

This is not a defect.

 

 

 

 

 

 

 

 

 

 

33. Images on the LCD

 

33. • The speaker volume is too

 

33. • Turn the speaker volume

 

 

monitor are jittery.

 

great.

 

down ( pg. 20).

 

 

 

 

 

 

 

34. Blocks of noise appear

 

34.

 

34. • Clean the video heads with

 

 

during playback, or there is

 

————

 

an optional cleaning

 

no playback picture and

 

 

cassette ( pg. 67).

 

 

 

 

 

 

the screen becomes blue.

 

 

 

 

 

 

 

 

 

 

 

 

35. The LCD monitor, the

 

35.

 

35. • Wipe them gently with soft

 

 

viewfinder and the lens

 

————

 

cloth. Wiping strongly can

 

have become dirty (ex.

 

 

cause damage ( pg. 65).

 

 

 

 

 

 

fingerprints).

 

 

 

 

 

 

 

 

 

 

 

 

36. An unusual mark appears.

 

36.

 

36. • Check the section of the

 

 

 

 

————

 

manual that explains LCD

 

 

 

 

monitor/viewfinder

 

 

 

 

 

 

 

 

 

 

 

indications ( pg. 62 – 64).

 

 

 

 

 

 

 

37. An error indication

 

37. • A malfunction of some kind

 

37. • Remove the power supply

 

 

(E01 — E06) appears.

 

has occurred. In this case

 

(battery pack, etc.) and wait

 

 

 

the camcorder’s functions

 

a few minutes for the

 

 

 

become unusable.

 

indication to clear. When it

 

 

 

 

 

does, you can resume using

 

 

 

 

 

the camcorder.

 

 

 

 

 

If the indication remains

 

 

 

 

 

even though you repeat the

 

 

 

 

 

above two or three times,

 

 

 

 

 

please consult your nearest

 

 

 

 

 

JVC dealer.

 

 

 

 

 

 

 

 

 

38. The charger indicator on

 

38. • The temperature of the

 

38. • To protect the battery, it is

 

 

the camcorder does not

 

battery is extremely high/

 

recommended to charge it

 

light.

 

low.

 

in places with a temperature

 

 

 

• Charging is difficult in

 

of 10°C to 35°C ( pg. 66).

 

 

 

places subject to extremely

 

 

 

 

 

 

high/low temperatures.

 

 

 

 

 

 

 

 

 

 

39. When the image is printed

 

39. • This is not a malfunction.

 

39. • By recording with “DIS”

 

 

from the printer, a black

 

 

 

activated ( pg. 35) this

 

bar appears at the bottom

 

 

 

can be avoided.

 

of the screen.

 

 

 

 

 

 

 

 

 

 

 

 

40. When the camcorder is

 

40. • The DV cable was plugged/

 

40. • Turn the camcorder’s power

 

 

connected via the DV

 

unplugged with power

 

off and on again, then

 

connector, the camcorder

 

turned on.

 

operate it.

 

does not operate.

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 59
Image 59
JVC GRDVL140 specifications EN59