48 EN USING THE OPTIONAL REMOTE CONTROL UNIT (cont.)
Recording Start/Stop Button
I N | OUT | MODE | Random Assemble | |
1 – – 00 : 2 5 ~ 02 : 0 5 | – – – – | Editing Menu | ||
2 – – 0 7 : 1 8 ~ 08 : 3 1 – – – – | ||||
| ||||
3 – – 0 3 : 3 3 ~ 05 : 5 3 – – – – |
| |||
4 – – 0 9 : 3 0 | ~ 13 : 1 5 – – – – |
| ||
5 – – 15 : 5 5 | ~ 16 : 2 9 | – – – – |
| |
6 – – – | ~ |
|
| |
7~
8~
T I ME CODE | 1 6 | : 3 0 |
TOTAL | 9 | : 3 9 |
Remote Sensor
AUTOMATIC EDITING TO VCR
8
9 Point the remote control towards the VCR’s remote sensor and press VCR REC STBY (q6), or manually engage the VCR’s
10 Press the Recording Start/Stop Button on the camcorder. Editing proceeds as programmed, right through to the end of the last registered scene.
•Pressing START/STOP on the remote control does not start editing.
•When dubbing is complete, the camcorder enters the Pause mode, and the VCR enters its Record- Pause mode.
•If you do not register an
•If you operate the camcorder during automatic editing, the VCR will enter its
11 EngageVCR. the Stop modes for the camcorder and the To make the R.A.Edit counter display disappear, press ON/OFF on the remote control.
NOTES:
●Pressing ON/OFF on the remote control clears all settings registered during Random Assemble Editing.
●When the editing cable is connected to the remote control’s Pause In connector during dubbing, make sure the remote control is pointed at the VCR’s sensor, and the path between the two is unobstructed.
●Random Assemble Editing may not function properly
when using a tape including several duplicated time codes ( pg. 19).
PAUSE
ON/OFF
VCR REC STBY
