JVC GV-DV1000 manual 10EN, Installingdv Capture Drivers

10EN

INSTALLINGDV CAPTURE DRIVERS

Caution

•In case the DV Capture Board has been installed with Windows® 95, these steps are not required.

FOR WINDOWS® 98

Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you have not done so already, install the DV Capture Board (see p. 8). Follow these steps to install the drivers. If you make a mistake during the install procedure, click the Back button and correct the mistake.

1 Turn on your computer. Put the included JVC CD-ROM in your CD-ROM drive. The New Hardware Found Window is displayed.

If the New Hardware Found Window is not displayed click the Start button on the Task Bar and select Shut Down. In the Shut Down Windows window select Restart the computer and click OK.

2 The Add New Hardware Wizard is displayed.

Click the Next button.

3 Make sure Search for the best driver for your device. (Recommended). is

selected. Then click the Next button.