5
6
7
EN 9
Remove the DV Capture Board from its antistatic packaging. Always handle the card by its edges.
IEEE 1394 DV Capture Board
Carefully insert the DV Capture Board into the PCI expansion slot until it is firmly seated, then replace the slot cover screw.
Replace your computer cover. The driver program (IEEE 1394 software) for the DV Capture Board must be installed on your computer before you can use the JVC Video Navigator.
Caution
•Computers may have vertical or horizontal PCI expansion slots. Refer to your computer manual to locate the PCI expansion slots.
•Do not place the DV Capture Board in an area where there is static electricity, such as on a carpet. Static electricity could damage the parts on the board.
•Do not touch the metal terminals with your bare hand.
•Do not give the board a strong shock because precise electronic parts are mounted on the board.
•Refer to the computer’s instruction book before removing the board from your computer. The board or your computer may be damaged if the board is removed incorrectly.
•Do not spill water on the board.
