JVC GVT0141-003A manual Operating the VCR, Operating external components with the remote control

Keep the button pressed until step 4 is finished.

3 Press ENTER.

4 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a Panasonic VCR:

Operating external components with the remote control

See page 11 for button locations.

Operating the VCR

7To set the manufacturer’s code

1 Slide the remote control mode selector to VCR.

7Operation

Aim the remote control at the VCR.

IMPORTANT

Before using the remote control to operate a VCR; Set the remote control mode selector to VCR.

The following buttons are available:

2

VCR:Turns VCR on and off.

VCR

Press and hold VCR.

Press 1, then 7.
For an Philips VCR:
Press 0, then 9.
Manufacturer	Code	Manufacturer	Code
JVC	01, 02, 03	Philips	09
Emerson	11, 26	RCA	05, 06
Fisher	29	Samsung	24
Funai	10, 14-16	Sanyo	21-23
Gold Star	12	Sharp	27, 28
Hitachi	04	Shintom	30
Mitsubishi	13	Sony	18-20
NEC	25	Zenith	08
Panasonic	07, 17

5 Release VCR.

If there is more than one code listed for your brand, try each one until you enter the correct one.

3(play button):Starts playback. 7:Stops operation.

8:Pauses playback.

¡:Fast forwards video tape.

1:Rewinds video tape.

REC:Press this button together with 3 (play button) to start recording or together with 8 to pause recording. CHANNEL +/–:Changes the TV channels on the VCR.

12