AV COMPU LINK remote control system
The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation. If your video/audio player (such as a DVD player, CD player and VCR) and television or/and amplifier/receiver support the JVC AV COMPU LINK system and are tied with the JVC AV COMPU LINK cable(s), simply starting the player will automatically make all necessary settings on the television and/or amplifier/receiver to allow you to enjoy the playback.
Connection and setup
Using an AV COMPU LINK cable, connect the AV COMPU LINK terminals of each component to one another.
•The center unit setting for AV COMPU LINK is controlled using the OTHERS menu in the preference display (see page 33).
•Refer also to the instruction supplied with your TV or VCR.
Center unit
TV
•If you connect the center unit to a television via AV COMPU LINK, set the center unit’s AV COMPU LINK setting as follows.
•When connecting to the
•When connecting to the
•When connecting to the
IMPORTANT
When you make video connection between the player and another device (such as a TV) via the composite,
Notes for connection
•There may be no description about connections to the player in the instruction manual of a television or VCR. However, a television or VCR with AV COMPU LINK terminals indicating “II,” “EX” or “III” can be connected to the player.
Operation
The JVC AV COMPU LINK system allows you to enjoy video and/ or audio by simply pressing Play on the source component (the component which plays back the video or audio, such as a DVD player or VCR). You do not even have to switch on power on the TV.
1 Turn on the main power of the television.
2 Insert a disc (or tape) into the source component.
3 Press 3 of the source component.
The following actions are performed automatically:
•Turning on the television power.
•Setting the source of the television to the external input
37
