JVC GVT0141-003A manual Operating external components with the remote control

Operating external components with the remote control

The buttons described below are used on pages 11 and 12.

Remote control mode selector

(play button)

Number buttons

NOTE

•Manufacturers’ codes are subject to change without notice.

•Set the codes again after replacing the batteries of the remote control.

Operating the TV

7To set the manufacturer’s code

You can operate a JVC TV without setting the manufacturer’s code.

1 Slide the remote control mode selector to TV.

2 Press and hold TV.

Keep the button pressed until step 4 is finished.

3 Press ENTER.

4 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a Hitachi TV:

Press 1, then 0.

For a Toshiba TV:

Press 0, then 8.

Manufacturer	Code	Manufacturer	Code
JVC	01	Samsung	12
Hitachi	10	Sanyo	13
Magnavox	02	Sharp	06
Mitsubishi	03	Sony	07
Panasonic	04, 11	Toshiba	08
RCA	05	Zenith	09

5 Release TV.

If there is more than one code listed for corresponding brand, try each one until you enter the correct one.

7Operation

Aim the remote control at the TV.

IMPORTANT

Before using the remote control to operate a TV;

• Set the remote control mode selector to TV.

The following buttons are available:

TV:Turns TV on and off. TV VOL +/–:Adjusts the volume.

TV/VIDEO:Selects the input mode (either TV or VIDEO). CHANNEL +/–:Changes the channels.

1-10, 0, +10 (100+):Selects the channel.

TV RETURN:Alternates between the previously selected channel and the current channel.

11