Tuner operations
IMPORTANT
Before using the remote control for the
following operation;AUDIO 1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM.
The buttons described below are used on pages 35 and 36.
Remote control mode selector
Number buttons
Manual tuning
1 Press FM/AM repeatedly to select the band.
Example:
When the system is tuned in to 810 kHz.
8 1 0 k
2 Press TUNING 9/( repeatedly until you find the frequency you want.
When you hold down the button until the system starts searching for stations and then release it, the system stops searching automatically when a station of sufficient signal strength is tuned in to.
NOTE
•When a station of sufficient signal strength is tuned in, the TUNED indicator lights on the display window.
•When an FM stereo program is received, the ST indicator lights on the display window.
Setting the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing.
You can only change the AM tuner interval spacing while selecting AM as the band.
•You can operate the following procedures using the buttons on the front panel.
7To change the interval spacing into 10 kHz
Press ¢ while holding down 7.
7To change the interval spacing into 9 kHz
Press 4 while holding down 7.
NOTE
• 9 kHz is the initial setting.
35
