JVC GVT0141-003A Playback, Basic playback, Press OPEN/CLOSE, Place a disc, Press 3 play button

Playback

•The mark shows the types of discs the operation is available for.

IMPORTANT
Before using the remote		control for the
following operation;			AUDIO
1	Set the remote control mode selector to
	AUDIO.
2	Press DVD.

The buttons described below are used on pages 16 to 19.

Basic playback

1 Press OPEN/CLOSE.

•The system turns on and the disc tray comes out.

•0 on the center unit functions same as OPEN/CLOSE on the remote control.

2 Place a disc.

Label side up

When placing an 8 cm (3 inches) disc

(play button)	Remote control
	mode selector

3 Press 3 (play button).

For MP3

The file control display (see page 24) appears on the TV screen.

For JPEG

Each file (still pictures) is shown on the TV screen for about 3 seconds (slide-show). When stopping playback, the file control display (see page 24) appears on the TV screen.

7To pause

Press 8.

To return to playback, press 3 (play button).

7 To stop

Press 7.

Number buttons

7 On-screen guide icons

During DVD VIDEO playback, the following guide icons may appear for a while on the TV screen;

•: appears at the beginning of a scene containing multi- subtitle languages.

•: appears at the beginning of a scene containing multi-audio

languages.

• : appears at the beginning of a scene containing multi-angle views.

• (Play), (Pause), / (Fast forward/

	fast-reverse),	/	(Slow-motion forward/
	reverse): appears when you perform each operation.
•	: the disc cannot accept an operation you have tried to do.

NOTE

•(For JPEG) The system cannot accept operations even though you press any buttons before the entire picture appears on the TV screen.

•If you do not want the on-screen guide icons to appear, see page 33.

16