3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS
1. Loosen the mount ring.
2. Connect the cable connector.
3. Attach the lens with its pin aligned with the hole in the mount.
4. Tighten the mount ring.
Be sure to tighten the mount ring completely. Incomplete
tightening may result in the lens dropping off or disturbed
back focus.
CAUTION:
1. Loosen the stopper screw on the viewfinder.
2. Connect the connector.
3. Align the mounting guide with the camera's viewfinder mount
base and attach the viewfinder.
4. Tighten the stopper screw.
5. Tighten the sliding securing ring.
* To detach the viewfinder, reverse the mounting procedure.
E-31