10. S.S.F. (Super Scene Finder) FUNCTION
The S.S.F. data recorded in the unit's memory can be deleted
in the record mode and the record-pause mode.
This function is only valid in the MARK mode.
In the record mode, press the NG button after the IN point
has been stored or after the scene has been stored.
• The S.S.F. data of the cut that you are currently shooting is
deleted.
When the NG button is pressed after the IN point has been
stored, the scene number is not updated.
* The S.S F. data of previous cuts are not deleted.
In the record-pause mode, press the NG button.
At the point when the TAKE button is used to store the next
scene, the S.S.F. data of the immediately preceding cut is
deleted.
Note:
The NG button is only valid for the immediately preceding
scene. The erase of scene data by the NG button cannot
be confirmed on the unit.
NG button
Operation
Press the STOP button to enter the stop mode.

1.

2.
Press the RESET button while the LOG button is kept
pressed.
• All the S.S.F. data held in the memory are erased.
However, the reel number is not cleared.
2. LOG button 1. STOP button
- Note:
The unit is not provided with a function for reading out
the S.S.F. data from a tape.
Necessary data should be moved to another device
before resetting. Also, to read out the S.S.F. data from a
tape, please use the optional DV Videocassette
Recorder BR-DV600.
2. RESET button
E-62