JVC GY-DV500 - page 67

12. SETUP MENU
DISPLAYING AND SETTING VCR SETUP MENUS
"MENU" indication
Viewfinder
1.
Engaging the VCR Setup Menu mode.
Press the MENU button.
• The "MENU" indication in the display section starts
blinking and the VCR Setup Menu appears in the
viewfinder and on the counter display.
Note:
When a cable is connected to the VTR REMOTE connector,
the VTR Setup Menu is not displayed in the viewfinder.
GROUP menu screen
Counter display
Item menu screen
Selecting the GROUP.
Press the GROUP button.
• Each time the GROUP button is pressed the selected
GROUP number is shown blinking on the viewfinder
screen. The counter display shows the selected group.
Open the Item menu of the selected GROUP.
Press the SELECT button.
Selecting the Item.
Press the ITEM button
• Each time the ITEM button is pressed the selected item
number is shown blinking on the viewfinder screen. The
counter display shows the selected item.
Changing the setting value of the item.
Press the SELECT button and select the setting value.
2.
3.
4.
5.
DATA SET display
6.
When multiple items should be set, repeat the operations
•
•
•
of steps 4. and 5.
To set menu items in other groups, press the MENU
button. When the relevant group menu is displayed,
perform the setting.
When the GROUP button is pressed, the items of the
higher order group menu are displayed.
Saving the setting value.
Press the DATA SET button.
•
"DATA SET" appears in the viewfinder and on the counter
display and the setting value is saved in the GY-DV500's
memory The display returns to the normal screen mode
when data has been saved.
If the MENU button is pressed without pressing the DATA
SET button, the display returns to the normal screen
mode without the setting value being changed.
E-67