Preparations
Preparation and Adjustment Before Use
Attaching the Audio UnitThe audio unit (with handle) is not attached to the camera recorder unit when purchased.
Attach the audio unit according to the following procedure.1Attach the audio unit by sliding it all the way into the shoe on the top of the camera recorder.
2Turn the screw on the audio unit clockwise to fasten it fully and securely to the camera recorder.
0If the audio unit is not fully and securely tightened, it will be loose and may drop off from the camera recorder during use.
3Connect the audio unit cable to the [AUDIO IN] terminal of the camera recorder.
| Clamp |
| Screw |
Shoe | Cable |
MIC
Open the cover
[AUDIO IN] terminal
Memo :
0The cable of the audio unit cannot be fastened using a clamp. The clamp is intended for fastening the microphone cable.
0For details on mounting an external microphone and its settings, refer to “Attaching an External Microphone”.
1Turn the knob on the microphone holder anticlockwise to loosen and open the microphone holder.
2Place the microphone in the microphone holder.3Turn the knob on the microphone holder clockwise to secure the microphone.4Connect the microphone to the [INPUT1] or [INPUT2] (XLR) terminal according to the type of microphone cable terminal you are using.
5Attach the microphone cable to the clamp.6Specify the audio input settings correctly.0For details on the method of audio input, refer to “Audio Recording” (A p. 45).
Knob | Microphone (Optional) |
Clamp
Microphone Holder
[INPUT1/INPUT2] Terminal
AUDIOIN
OPEN
MIC
22