Manuals / Brands / Photography / Camcorder / JVC / Photography / Camcorder

JVC GY-HMQ10E, GY-HMQ10U Details, F-number, Aperture value, o Setting Values, 3Set the F-number, 4Confirm the F-number, o Setting aperture to Auto, Set to the Manual shooting mode

1 72

Download 72 pages, 3.39 Mb

Shooting

Adjusting the Aperture

Applicable to: Manual shooting mode M

The aperture value (F-number) of the lens can be set as follows.

F-number	Details

Decrease	The subject appears brighter.
	The focused range becomes sharper, while the
	background is blurred to produce a soft image.
Increase	The subject appears darker.
	Background of image becomes focused as well.

1Set to the Manual shooting mode.

2Set to the aperture adjustment mode.

0Press the [IRIS] button to set to the aperture adjustment mode.

0The current F-number is displayed.

3Set the F-number.

0Operate with the [ADJ.] knob.

0The selected F-number is displayed.

Aperture value

F2.8

4Confirm the F-number.

0Press the [SET] button.

0Doing so exits the adjustment mode and the F-number is displayed.

FULL AUTO AE

AF

M F

	SET	SHUTTER
ADJ.	GAIN	WHT. BAL	IRIS
	L-	B -
	M-	A-
	H-	PRST

DOOR LOCK

[IRIS] Button

[SET] Button

[ADJ.] Knob

o Setting Values

0F2.8 - F5.6 (7 steps)

The open F-number of the aperture varies according to the zoom position.

Wide-angle (W) end: F2.8

Telephoto (T) end: F4.5

Memo :

0When zooming to the Tele end, the aperture value is set according to the zoom and indicated in yellow.

Set the zoom to the wide angle end to enable the smallest F- number to be set.

o Setting aperture to Auto1Press the [IRIS] button several times until the F-number display disappears.

40

Contents

For Future Reference: Enter the Model No. (located on the bottom of the camera) and Serial No (located on the battery pack mount of the camera) below Model No. GY-HMQ10 Serial No Introduction Preparations Shooting Playback Copy Recording in 4K2K Mode Recording in HD Mode Recording on SDHC/SDXC Cards (Class 6/10) Supports 60Hz/50Hz HD Signals in Both 4K2K and HD Modes Focus Assist Function CAUTION IMPORTANT SAFETY INSTRUCTIONS 1.Read these instructions 2.Keep these instructions 3.Heed all warnings 4.Follow all instructions ■ For GY-HMQ10E DO NOT cut off the mains plug from this equipment BE SURE DO NOT make any connection to the Larger Terminal coded E or Green The wires in the mains lead are coloured in accordance with the following code: Information for Users on Disposal of Old Equipment and Batteries Battery Products Notice: [European Union] [Business users] Controlled EMC environment (for example Port Cable Length [DC INPUT] Recording Medium •Do not splash the recording medium with water •Do not turn off the camera power or remove the battery •Do not touch the metal parts •When formatting or erasing data using the camera, only Transportation o Do not drop or hit this unit against a hard object when transporting Storage and Usage Locations o Allowable ambient temperature and humidity o Strong electromagnetic waves or magnetism SDHC/SDXC Cards o UHS Speed Class is not supported Handling of SDHC/SDXC Cards oMake use of the SDHC/SDXC card within the prescribed conditions of use oDo not splash the SDHC/SDXC card with water LCD Monitor/Viewfinder Characteristic Lens Phenomena Copyright o Any recordings made on this camera recorder that Memo : FG H DEFG H I J P [CH-1/CH-2] CH-1/CH-2recording level adjustment knob Q [CH1/CH2 AUDIO SELECT] CH-1/CH-2audio selection switch “Adjusting the audio recording level” (A p. 46) R [AUDIO INPUT 1/2] E F GH oRear ABC DE F A Battery lock release button B USB Connector C [DC] input terminal oLCD Screen Display Information (During Recording) 123 4 56 7 8 90 a b 60P UXP 10:45AM Y Magnify button ZFAW a Gain level b Zoom button c Aperture value o LCD Screen Display Information (During Playback) a60P 4K UXP 00:01:23 0:12:34 7 40SEC A 4K2K mode BDrag the thumbnails on the touch screen to search for the desired file o Recording Screen 4KAF The touch screen of this unit is 0Do not press or rub with excessive force Attaching the Audio Unit Attach the audio unit according to the following procedure Connect the audio unit cable to the [AUDIO IN] terminal of the camera recorder For details on mounting an external microphone and its settings, refer to Attaching an External Microphone Adjusting the Grip Belt Caution : Attaching the Tripod Setting up the Remote Control 1Connect a wired remote control to the camera recorder Removing the Battery Press the battery lock release button and slide the battery to the left Charging time and continuous recording time 1 Set the [STANDBY/ON OFF] switch to [OFF] Turning On the Power o When the AC adapter is connected 1Connect the AC adapter to the [DC] terminal 2Set the [STANDBY/ON OFF] switch to [ON] o [CAM/MEDIA] operation mode and indicating lamp status 6 Select the region where you live and tap “SAVE” 1Set the [STANDBY/ON OFF] switch to [ON] 2 Open the LCD monitor 3Tap “YES” when “SET DATE/TIME!” is displayed 1Tap “MENU” 2Tap “Q” (Common) 3Tap “TOUCH SCREEN ADJUST” 4Tap “+”. (3 times in total) 1/3 6 Tap “OK” 3 Tap “LANGUAGE” 4Tap to the desired language Write-ProtectSwitch Write/Delete Enabled Write/Delete Disabled Estimated Recordable Time of SDHC/SDXC Cards Recording Quality 4 GB 8 GB o Viewing with the viewfinder 1Pull out the viewfinder 2Incline the viewfinder vertically to a position that enables easy viewing 3Turn the eyepiece focus lever to adjust the focus o Viewing on LCD monitor Selecting the Full Auto / Manual Shooting Mode o Setting to the Full Auto shooting mode the screen o Setting to the Manual shooting mode Full Auto Shooting Mode 04K2K recording: 0HD recording: Full high definition quality (1920 x 1080) Selecting a Video Recording Format You can select a video recording format o Recording in 1920 mode Checking Image on Monitor before Shooting o Recording in 4K2K mode 1 Connect to a monitor Zoom Operation A Camera recorder’s zoom lever on the top surface BZoom button on touch panel (W/T) o A zoom bar appears during zoom operation W T Using the Focus Assist Function There are two ways to activate the Focus Assist function ASet “FOCUS ASSIST” in the recording menu to “ON” “ FOCUS ASSIST ” (A p. 60) BAssign the Focus Assist function to a user button and press the button Tele Macro Icon AE Value 1Set to the Manual shooting mode 2Set to the shutter speed adjustment mode 3Select a shutter speed value Shutter speed 4Confirm the shutter speed value F-number 2Set to the aperture adjustment mode 3Set the F-number Aperture value 4Confirm the F-number 0Select a white balance type using the [WHT.BAL] switch You can select one of the three white balance types using the [WHT.BAL] switch [WHT.BAL] switch Switches to the white balance type that is o Error Message Error Message Status NG：OBJECT The object used is defective Image Stabilizer Icon o Indications During Time-LapseRecording 40SEC ① 0:00:00:00 0:00:00[000:00] Display Applicable to: Camera mode There are two ways to input audio sound ABuilt-inmicrophone B[INPUT1] terminal / [INPUT2] terminal 0The priority order of the input is in the sequence of B>A o Adjusting the audio recording level Select a method for adjusting the audio recording level 0Set the [CH1/CH2 AUDIO SELECT] switch 0Select whether to set each channel to the [AUTO] or [MANUAL] mode AUTO: o Playback in 4K2K mode 1Tap “<<PLAY” to select the playback mode 2Tap on the file to start playback 0Tap e during playback to pause 0Tap u during playback to return to the index screen Playing Back in Magnified Display Adjusting the Volume of Videos 1 Tap A 1 Tap U 2 Tap on the area to magnify Checking the Recording Date and Other Information APress the INFO button while playback of the video is paused Index Screen Display Screen Display During Playback Timeline Bar by tapping the desired scene Pointer Displays the current estimated playback 4Tap on the file to start playback OTHER FILE 0Files recorded in the 4K2K mode are not displayed 0Use a High Speed HDMI Mini Cable for the HDMI mini cable 0Refer also to the instruction manual of the monitor in use Playing Videos Recorded in 4K2K Mode 2 Connect the AC adapter to the [DC] terminal 1Connect to a monitor 3Turn on the power and set to the Playback mode 5Play back a file Playing Videos Recorded in 1920 Mode 2Connect the AC adapter to the [DC] terminal 5 Play back a file 2 Tap A Deleting the Currently Displayed File 2Tap “YES” Tap on the files to delete Tap “SET” Protecting/Releasing Protection of the Currently Displayed File 2Tap “PROTECT/CANCEL” 3Tap “YES” Protecting/Releasing Protection of Selected Files 3Tap “PROTECT/CANCEL” 5Tap “SET” to complete the setting 1Connect to a computer 0Turn on the power. (A p. 25) 0The subsequent operations are to be performed on the computer 3Windows Mac List of Files and Folders Operating the Main Menu 2Tap the desired menu 3Tap the desired setting Operating the Common Menu You can change the recording settings in this menu FOCUS ASSIST COLOR 0 Select “MULTICOLOR”, “RED”, “GREEN”, or “BLUE” ZEBRA this to check the bright areas (blowout) and adjust the brightness FAW manual shooting Not set: FAW function is not assigned A: assigns FAW to the A position B: assigns FAW to the B position REC MODE For setting the image quality when “SYSTEM SELECT” is in the 1920 mode UXP: Enables recording in the best picture quality XP: Enables recording in high picture quality SP: Enables recording in standard quality AUDIO MONITOR For setting the audio sound of the headphone MIX: Outputs mixed sound STEREO: Outputs stereo sound MIC LEVEL METER MONITOR Sets the brightness of the LCD monitor BRIGHTNESS 3: Sets to the standard brightness 1: Sets to dim brightness. Helps conserve the battery life when selected Action RECOVERY OF FILE FAILED UNABLE TO maximum file number in the folder with the maximum number RECORD FURTHER Alternatively, copy all the files to a computer, and format the SD cards Shooting stops by itself Shooting may stop halfway due to the nature of the SDHC/SDXC card B Check whether the card is a recommended SD card (Class 6 or higher) BErase the contents of the SDHC/SDXC card (Delete, Format) Readjust the brightness of the LCD monitor screen The [CH-1/CH-2]recording level Is the [CH1/CH2 AUDIO SELECT] switch set to [AUTO] adjustment knob does not work SDHC/SDXC card cannot be initialized (formatted) Camera Terminals Video (4K2K mode) Video (1920 mode) AC Adapter UIA336-12 / UIA336-1230 Battery SSL-JVC50 Dimensional Outline Drawing (Unit: mm)