Assigning Functions to the USER Buttons

This unit comes with three user buttons, [USER1], [USER2], and [USER3].

A specific function can be assigned to each button according to your preference.

 

 

AUTOMANUAL

2

CH-2INPUT

AUDIOINPUT

CH-1

3

4

 

-LINE-

AUDIO

5

INPUT1

 

INPUT2

-MIC-

SELECT

 

MIC+48V

 

0

INPUT1 INPUT2

CH-2

1

2

 

 

AUTO MANUAL

3

USER1

USER2

USER3

FULL AUTO AE

CAM/MEDIA INFO

AF

M F

 

SET SHUTTER

[USER3] button

ADJ.

GAIN WHT. BAL IRIS

L-

B -

[USER2] button

M-

A-

H-

DOOR LOCK

PRST

 

[USER1] button

Memo :

0You can assign “FOCUS ASSIST”, “TELE MACRO”, and “ZEBRA” respectively to the three user buttons, “USER1”, “USER2”, and “USER3” in the recording menu. You can also leave them unassigned. (A p. 63)

Tally Settings

You can select whether to enable the illumination of the tally lamp. Set using “TALLY” in the common menu. (A p. 64)

When this is set to “ON”, the tally lamp lights up in the recording mode.

Tally Lamp

AWB

Tally Lamp

Preparations

Adjusting the Touch Panel Button Position

If the reactive area of the screen is misaligned with the touched area, adjust the alignment between the button display position and the reactive area.

0Select “TOUCH SCREEN ADJUST” in the common menu.

1Tap “MENU”.2Tap “Q” (Common).3Tap “TOUCH SCREEN ADJUST”.

COMMON

TOUCH SCREEN ADJUST

0The touch screen adjustment screen appears.

4Tap “+”. (3 times in total)

PRESS THE + MARK

1/3

0Keep tapping “+” as its position changes with every tap.

5Tap “+” again to confirm the adjusted positions. (3 times in total)

CONFIRM THE ADJUSTMENT

PRESS + MARK AGAIN

1/3

0Keep tapping “+” as its position changes with every tap.

0If areas on the adjustment screen other than the “+” mark are tapped, errors will occur. In this case, try again from step 4.

27