JVC GY-HMQ10E, GY-HMQ10U ZOOM, GRID, REC MODE, WIND CUT, RECORDING, TIME-LAPSE, EDGE BLENDING, AUDIO REF. LEVEL, INTERNAL MIC LEVEL, (when recorded at 60i), (when recorded at 60i)

Settings Menu

Setting				Details
REC MODE		For setting the image quality when “SYSTEM SELECT” is in the 1920 mode.
		UXP: Enables recording in the best picture quality.
	0		Applies to Blu-ray discs only. Videos taken in high-definition quality cannot be saved to DVDs.
	XP: Enables recording in high picture quality.
	SP: Enables recording in standard quality.
	EP: enables long recording.
		Memo :
	0		This setting is not available when “SYSTEM SELECT” is set to the 4K2K mode.
		0	This setting is not available when the frame rate is 60p or 50p.
EDGE BLENDING		Overlaps the seam of four images when “SYSTEM SELECT” is set to the 4K2K mode.
		0 PIXEL: does not overlap the seam of the images during recording.
		16 PIXEL: record with the borders overlapped. (A black band will appear on up, down, left and right).
ZOOM		Sets the maximum zoom ratio.
		10x/OPTICAL: Enables recording with 1 - 10x optical zoom. Set this when dynamic zoom is not desired.
		20x/DYNAMIC: Enables recording with 1 - 10x optical zoom and 11 - 20x digital zoom.
	Memo :
	0		This setting is not available when “SYSTEM SELECT” is set to the 4K2K mode.
WIND CUT		Setting this to “ON” reduces any noise caused by the wind.
		Memo :
	0		You can specify a setting for each of the [INPUT1] (microphone), [INPUT2] (microphone), and [MIC]
			(microphone/built-in microphone) terminals.
GRID		Setting this to “ON” displays gridlines (GRID) to make it easier to detect when the subject appears slanted.
TIME-LAPSE		This function enables the changes of a scene that occur slowly over a long period to be shown within a short
RECORDING		time by taking frames of it at a certain interval.
		OFF: disables TIME-LAPSE RECORDING.
		1SEC INTERVAL: records a frame at 1-second intervals. Recorded videos are played back at a 30x speed
		(when recorded at 60i).
		5SEC INTERVAL: records a frame at 5-second intervals. Recorded videos are played back at a 150x speed
		(when recorded at 60i).
		40SEC INTERVAL: records a frame at 40-second intervals. Recorded videos are played back at a 1200x
		speed (when recorded at 60i).
		Memo :
	0		Audio cannot be recorded during TIME-LAPSE RECORDING.
	0		DuringTIME-LAPSE RECORDING, zooming and image stabilizer are not available.
	0		When recording is stopped with the recorded time less than “0:00:00:17”, the video will not be saved.
	0		Settings of TIME-LAPSE RECORDING are reset when the power is turned off. To start time-lapse recording
			again, it is necessary to make the selection once more.
	0		Recording stops automatically 99 hours after it is started.
	0		Make use of a tripod and AC adapter for TIME-LAPSE RECORDING with long intervals.
			It is also recommended to fix the focus and white balance manually.
AUDIO REF. LEVEL		For setting the audio reference level.
		-20dB: Outputs signals of the reference level when the meter is at -20 dBFS.
		-12dB: Outputs signals of the reference level when the meter is at -12 dBFS.
INTERNAL MIC LEVEL		For setting the input level of the built-in microphone (-2 (low sensitivity) ~ 0 (standard) ~ +2 (high sensitivity)).

62