JVC GY-HMQ10E, GY-HMQ10U Write-ProtectSwitch, Write/Delete Enabled, Write/Delete Disabled, Slide the, Preparations, Slot Display, Open the door, 2Open the door, 2Open the door

Preparations

Inserting an SDHC/SDXC Card

This camera recorder comes with four SDHC/SDXC card slots. (Slots A, B, C, and D)

1Set the [STANDBY/ON OFF] switch to [OFF].

2Open the door.

0Slide the [DOOR LOCK] lever to the right, and pull the door toward you.

3Insert an SDHC/SDXC card with the notched corner first.

0To record in the 4K2K mode, insert four SD cards into slots A to D.

The four media icons light up when SD cards are inserted into all the slots.

0When recording in HD quality (1920 mode), insert an SD card into slot A.

After an SD card is inserted, the media icon for slot A will light up.

4Close the door.

0After closing the door, slide the [DOOR LOCK] lever to the left, and make sure that the door does not open up by itself.

Notched	[DOOR LOCK] Lever
Corner
Face label upward	Door

Caution :

0The memory card needs to be formatted in advance if it has not been used for recording in the 4K2K mode before.

See “Formatting (Initializing) SDHC/SDXC Cards” (A p. 30).

0When you insert the formatted cards, ensure that the combination and sequence of the four cards are matching correctly. If the combination or sequence is incorrect, cards cannot be used.

In order not to forget, take notes on the combination and sequence of the cards when formatted.

SDHC/SDXC cards to use

See “SDHC/SDXC Cards” (A p. 11).

Slot Display

The icon of the slot will appear blinking in the following cases.

0When the card is write-protected

0When the card in use does not support Class 6 or higher

0When the card is faulty

0When there is no card in the slot

When in the 4K2K mode, the four slot display icons will appear blinking in the following cases.

0When there is a slot with no card inserted

0When the combination of the four cards is incorrect

0When there is an unformatted card

Removing the SDHC/SDXC Card

1Set the [STANDBY/ON OFF] switch to [OFF].

2Open the door.

0Slide the [DOOR LOCK] lever to the right, and pull the door toward you.

3Push the SDHC/SDXC card and remove it from the slot.

4Close the door.

0After closing the door, slide the [DOOR LOCK] lever to the left, and make sure that the door does not open up by itself.

Memo :

0Do not touch the metal part of the SDHC/SDXC card when inserting or removing the SDHC/SDXC card.

Write-Protect Switch on the SDHC/SDXC Card

ASlide the write-protect switch upward to enable writing or deleting.

BSlide the write-protect switch downward to prevent writing or deleting. (Recorded data in the card are protected.)