JVC GZ-MG20AG, GZ-MG20AS Using the Battery Pack, Perform steps 2 3 in Charging the Battery Pack

NOTES:

●This product includes patented and other proprietary technology and will operate only with JVC Data Battery. Use the JVC BN- VF707U/VF714U/VF733U battery packs. Using generic non-JVC batteries can cause damage to the internal charging circuitry.

●If the protective cap is attached to the battery pack, remove it first.

●During charging, the camera cannot be operated.

●Charging is not possible if the wrong type of battery is used.

●Make sure to use the battery pack with the arrow () mark. The camera does not turn on with the battery mount cover without the arrow () mark.

●When charging the battery pack for the first time or after a long storage period, the power/charge lamp may not light. In this case, remove the battery pack from the camera, then try charging again.

●If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced.

Please purchase a new one.

●Since the AC adapter processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

●Using the optional AA-VF7 battery charger, you can charge the BN-VF707U/VF714U/VF733U battery pack without the camera.

●After 5 minutes has elapsed in record-standby mode, the camera will automatically turn off its power supplied from the AC adapter. In this case, the battery charge starts if the battery is attached to the camera.

GETTING STARTED EN 15

Using the Battery Pack
Perform steps 2 – 3 in “Charging the Battery
Pack”.			STARTED
	Battery pack	Recording time
Maximum continuous recording time
			GETTING
	BN-VF714U	Approx. 2 hr. 10 min.
	BN-VF707U*	Approx. 1 hr. 00 min.
		(55 min.)
		(2 hr. 00 min.)
	BN-VF733U	Approx. 5 hr. 00 min.
		(4 hr. 45 min.)
*	Provided
(	): When the LED light is on.

NOTES:

●Recording time is reduced significantly under the following conditions:

•Zoom or record-standby mode is engaged repeatedly.

•Playback mode is engaged repeatedly.

●Before extended use, it is recommended that you prepare enough battery packs to cover 3 times the planned recording time.

ATTENTION:

●Before detaching the power source, make sure that the camera’s power is turned off. Failure to do so can result in a camera malfunction.

●If the camera is a subject to electrostatic discharge, turn the power off before using it again.