JVC GZ-MG20AH manual Connections Windows, Connecting the USB cable, To close Windows Messenger

NOTES:

●If PowerDirector/PowerProducer/PowerDVD have already been installed on the PC, uninstall them before installing the provided software:

Video files captured with this camera can only be handled on the provided software. Please install and use the provided software (PowerDirector Express NE, PowerProducer 2 Gold NE, PowerDVD 5 NE).

●If you perform installation of a software that is already installed, uninstallation will start. In this case, perform the installation again after uninstallation is finished.

●Windows Messenger has to been closed during CyberLink DVD Solution installation. If it is running during installation, [Information] screen appears.

To close Windows Messenger:

1)While holding [Ctrl + Alt] key, click [Delete] key so that [Task Manager] appears.

2)Click [Processes] tab.

3)Select [msmsgs.exe].

4)Click [End process].

Connections (Windows®)

Connecting the USB cable

Connect the USB cable to copy still images and video files in a recording medium to the PC.

PC

To USB connector Camera

USB cable

To USB connector

1 To assure safety, make sure all units are turned off before making any connections.

2 Use the USB cable to connect the camera to the PC.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack.

●When the USB cable is connected, turning on or off the camera causes malfunctions of the PC.

●Connect the camera directly to the PC, not through the hub.

●Do not use an extension USB cable.

– 13 –