Instant ReView
Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last
NOTES:
●Before starting, make sure that the recorder is off and that the Timer mode is disengaged.
●Turn on the TV and select the VIDEO channel (or AV mode).
ACTIVATE INSTANT
REVIEW
1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last
If you have, for example, 3 programmes and wish to watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.
NOTE:
Instant ReView is not possible while the recorder is in the Timer mode.
Repeat Playback
Your video recorder can automatically play back the whole tape 20 times repeatedly.
1 |
| START PLAYBACK |
| Press PLAY. | |
|
| ACTIVATE REPEAT |
2 |
| PLAYBACK |
| Press PLAY and hold for over 5 seconds, then release. | |
| ● "PLAY" on the display panel blinks slowly. | |
|
| |
|
| ● The tape plays 20 times automatically, and then |
|
| stops. |
|
|
|
3 |
| STOP PLAYBACK |
| Press STOP at any time to stop playback. |
NOTE:
EN
13
Index Search
Your recorder automatically marks
index codes at the beginning of£ 2 each recording. This function gives
you quick access to any one of 9 index codes in either direction.
NOTE:
Before starting, make sure the recorder is in the Stop mode.
ACTIVATE INDEX SEARCH
1 Press PUSH JOG % or % (ª or £). “ª 1” or “£ 1” is displayed on screen and search begins in the corresponding direction.
●To access index codes 2 through 9, press PUSH JOG
% or % repeatedly until the correct index number is displayed.
Ex.: To locate the beginning of B from the current position, press PUSH JOG %twice.
To locate the beginning of D from the current position, press PUSH JOG %once.
Current position
A |
| B |
| C |
| D | E |
| F | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1 | 2 | 3 |
| ||||||||
|
|
| % |
|
|
| % |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
Index number
●When the specified index code is located, playback begins automatically.
Counter Memory
Returns to the counter reading of “0:00:00” to conveniently find a specific place on the tape automatically.
1 | SET COUNTER MEMORY |
Press C. RESET during playback at a point you wish to | |
locate later. The counter reads “0:00:00”. Then press C. | |
MEMORY, and “M” appears on the front display panel. |
| ACTIVATE COUNTER | |
2 | MEMORY | |
When you wish to return to the designated point, press | ||
STOP and then REW or FF. | ||
● The tape rewinds or | ||
| ||
| 0:00:00 automatically. | |
| ● To cancel Counter Memory, press C.MEMORY again. |
Pressing PLAY, REW , FF or PAUSE also stops Repeat Playback.
