JVC HR-E639EE, HR-E539EE Select Televi- sion System, Tune The TV To Your Video Recorder

4EN

INSTALLINGYOURNEWRECORDER (cont.)

Select Televi- sion System

Major countries	Colour TV broadcast	Switch
	system	position
China, Mongolia,	PAL D/K
Rumania
Bulgaria, Czech Rep.,		K
Slovakia, Hungary,	SECAM D/K
Poland, Russia
Austria, Denmark,
Finland,Holland, Italy,
Norway, Spain,	PAL B/G	G
Switzerland, Sweden,
Germany
Egypt	SECAM B/G

Tune The TV

To Your Video

Recorder

	000	0
000	0	000
000		0000
000		0
00		00
00		00
00		00
00		00

OPERATE

SET SYSTEM SWITCH

1 Set to the appropriate position depending on your TV system. (Refer to the chart on the left.)

NOTES:

●If no colours appear on the screen when using a multi-system television with its system select switch set to AUTO, change the switch position to correspond to the recorder's RF system select switch (G or K).

●For more information on multi-system compatibility. ☞ p.24

Back of recorder

TEST	SYSTEM
OFF – ON	K – G

The video recorder sends picture and sound signals via the RF connecting cable to your TV on UHF channel 36.

TURN ON THE RECORDER

1	Press OPERATE.
2	SELECT OUTPUT MODE
	Set the TEST switch on the back of the recorder to ON.
3	SET TV CHANNEL
	Set your TV to the video channel (UHF channel 36).
	Two white bars appear on screen vertically.

●Tune the TV until the bars are as clear as they can be.

●Your TV should be set to the channel designated for use with a video recorder, or to a spare channel if there is not a specified video channel on your TV.

RESET OUTPUT MODE

4 Return the TEST switch to OFF.

NOTES:

●If CH36 is occupied by a local station, adjust the RF output channel adjustment screw to use another channel between CH32 and CH40 instead.

●If some interference noise is continually seen on the screen, consult your JVC dealer.