Recording Features

 

ECORD

 

 

2

2

 

q

5/8

 

.

 

TV

PROG

 

 

 

1 2 3

4

5

6

7 8 9

EN15

Record One Programme

While Watching Another

SELECT CHANNEL TO

WATCH

1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.

The programme selected with the TV’s channel controls appears on the TV screen while the one selected with the TV PROG. button(s) is recorded on the tape.

Elapsed Recording Time

Indication

You can check the exact time of a recording.

1

SET COUNTER DISPLAY

Press DISPLAY until a counter reading appears on the

dispay panel.

 

Pressing the button changes the type of display:

 

Channel, Clock or Counter.

2

RESET COUNTER

Press C. RESET before starting recording or playback.

 

The counter is reset to “0:00:00” and shows the exact

elapsed time as the tape runs.

C.RESET

0

TV PROG.

DISPLAY

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the recorder off after recording is finished.

START RECORDING

1 Press RECORD on the recorder.

ENGAGE ITR MODE

2 Press RECORD again. "REC" blinks and 0:30 appears on the front display panel.

SET RECORDING DURATION

3 If you want to record for more than 30 minutes, press RECORD to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the RECORD button on the recorder's front panel.

Page 15
Image 15
JVC HR-J239EE manual Recording Features