JVC HR-J239EE Multi-Brand Remote Control, SET TV Brand Code, TRY Operating TV, EN Remote CON Trol

24ENREMOTECONTROL

Multi-Brand

Remote

Control

OPERATE

			1	2	3
NUMBER			4	5	6
			7	8	9
				0
	TV VOL. +/-				TV PROG.
DIGIT ENTRY					TV/VCR
					TV/VIDEO
		MUTE
			STOP		DISPLAY
PUSH JOG
					OK
			.%Þ
		TV	VOL
CODE		TV BRAND NAME
01		JVC
02		BRANDT, NORDMENDE, SABA, TELEAVIA,
		TELEFUNKEN, THOMSON
03		FERGUSON
04		PHILIPS
05		BLAUPUNKT, GRUNDIG
06		SONY
07		PANASONIC
08		GRAETZ, ITT, LUXOR, SALORA, SELECO
09		MIVAR
10		HITACHI
11		TOSHIBA
12		MITSUBISHI
13		FINLUX
14		NOKIA
15		SHARP
16		SAMSUNG

Your remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’s TVs can also be controlled by setting the appropriate switch on the remote control.

Before you start . . .

●Turn on the TV using its remote control.

●Set the remote control’s TV/VCR switch to TV.

NOTE:

If your TV is a JVC, you don’t have to set the code in step 1. Go to step 2.

SET TV BRAND CODE

1 Refer to the chart below. While holding down OPER- ATE, enter your TV’s brand code using the NUMBER keys, then press STOP.

●You don’t have to repeat this step until you replace your remote control’s batteries.

TRY OPERATING TV

2 Press OPERATE on the remote to turn the TV off. If it goes off, try other operations.

●The OPERATE button, TV/VIDEO button, TV PROG.

5/° button, TV VOL. +/– (or %/Þ) button and MUTE button on the remote can all be used to operate the TV.

●To return the remote to video recorder control, set its TV/VCR switch to VCR.

IMPORTANT

Although the provided remote control unit is compatible with JVC televisions, as well as many other models, it may not work with your TV, or in some instances, may have limited function capability.

Control Your TV Using Addi- tional Buttons

The NUMBER keys on the remote can also be used to select the TV’s channel by setting the remote control to the TV mode.

1Set the TV/VCR switch to TV.
2Use the NUMBER keys, and the DIGIT ENTRY (	)
button, the PUSH JOG button, the DISPLAY button or
the OK button to select the TV’s channel.

●With televisions under Code 01, 03, 04, 06, 07, 10 or 11, the DIGIT ENTRY button corresponds to the 1-digit/2- digit entry switching button (often labelled – /– –) of your TV’s remote control.

●With televisions under Code 01, 08 or 09, the PUSH JOG

%button corresponds to the 10 + button, and the PUSH

JOG % button corresponds to the 20 + button of your TV’s remote control.

●With televisions using Code 09, the DISPLAY button corresponds to the 30 + button.

●With televisions using Code 06, the OK button corre- sponds to the ENTER button of your TV’s remote control.

NOTE:

The way these buttons are used is determined by your TV. Use these buttons as instructed for your TV’s remote control.