JVC HR-J239EE Basic Connections, Check Contents, Situate Recorder, Connect Recorder to Mains

INSTALLINGYOURNEWRECORDEREN

3

Basic Connections

Back of TV

RF Cable (provided)

		TV
Aerial		Aerial
terminal	AV-IN	Cable
	terminals
	AV Cable
	(not provided)

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COM-

PLETED BEFORE ANY VIDEO OPERATION CAN BE PER- FORMED.

	CHECK CONTENTS
	Make sure the package contains all of the accessories
1 listed in “Specifications” (☞ pg. 28).
	SITUATE RECORDER
2 Place the recorder on a stable, horizontal surface.
	CONNECT RECORDER TO
3	TV
	The connection method you use depends on the type of
	TV you have.
	RF CONNECTION
	● To Connect To A TV With NO AV Input Terminals . . .
	a– Disconnect the TV aerial cable from the TV.
	b– Connect the TV aerial cable to the ANT. IN jack
	on the rear panel of the recorder.
	c– Connect the provided RF cable between the RF
	OUT jack on the rear panel of the recorder and the
	TV’s aerial terminal.
	After step 4, go to "Tune The TV To Your Video
	Recorder" on page 4.

ENGLISH

Mains Power Cord

Mains outlet

Rear View

RF output channel

AV CONNECTION

●To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per “RF

CONNECTION”.

b– Connect an optional AV cable between the AUDIO OUT and VIDEO OUT connectors on the rear panel of the recorder and the TV’s AV-IN terminals .

After step 4, go to "Select Television System" on page 4.

CONNECT RECORDER TO MAINS

4 Plug the end of the mains power cord into a mains

AUDIO OUT/ adjustment screw

VIDEO OUT

outlet.