JVC HR-J3006UM manual Plug & Play Setup, EN I Nitial Sett Ings, Auto Clock Set/Auto Tuner Set

6ENINITIALSETTINGS

For Customers in the U.S.A.*:

The Plug & Play function sets the clock and tuner channels automatically when power is first connected to the VCR. The antenna cable must be connected for the Plug & Play function.

Plug & Play	The time and date can be set automatically from clock setting
	data that is transmitted by one of the regular TV broadcast
	channels. We call this TV channel the “Host Channel” and it is
	a PBS channel in your area.

Auto Clock Set/Auto Tuner Set

ATTENTION

If you use a cable box, Plug & Play will not function; set the clock and tuner channels manually. (☞ pg.9 – 13)

IMPORTANT

●Don’t press any buttons on the VCR or remote while Plug & Play is in progress.

●If you perform Plug & Play successfully, there’s no need to perform the Clock (☞ pg. 9) and Tuner (☞ pg. 12) procedures. If, however, you want to add or delete channels, refer to “Add Or Delete A Channel” on page 13.

1

PLUG & PLAY SETUP

Connect the antenna cable to the VCR (☞ pg. 4). Then connect the VCR’s power plug to an AC outlet. Do not power on the VCR. The clock and tuner channels will be set automatically.

NOTES:

●Auto clock set is performed first. The auto clock set function scans all the channels received by your VCR to find the Host Channel and then sets the clock. "Auto" blinks on the front display panel during Auto clock set.

●Auto channel set is performed next. The auto channel set function scans all the channels that are receivable by your VCR. It then automatically assigns each receivable channels to the CH5° buttons. It skips non-receivable channels. During auto channel set the channel numbers are displayed as they are scanned and set.

●When Plug & Play has been completed successfully the correct time is displayed.

●If an incorrect time or "– –:– –" appears on the display panel, see "What To Do If Plug & Play Has Failed" on next page.

During Initial Auto Clock Set	During Auto Channel Set	Plug & Play Completed
"Auto" blinks.	The channel numbers are displayed	The current time (including
	as they are scanned and set.	AM/PM) is displayed.

●If an incorrect time or "– –:– –" appears on the display panel, see "What To Do If Plug & Play Has Failed" on next page.

*Plug & Play also functions if the VCR is in an area bordering the U.S.A. and can receive the clock setting data of a PBS station located in the U.S.A.; however, if Plug & Play does not function properly, perform manual clock setting. (☞ pg. 9 and 11)