Recording Features
1
1 2 3
4 | 5 | 6 | 2 |
|
TV/VCR
7 8 9
0 4
C.RESET
•• | •• |
3
EN
21
Record One Program While
Watching Another
1 | ENGAGE TV MODE |
During recording... | |
● Press TV/VCR. The VCR's VCR indicator goes out. (If | |
you are using the RF connection (☞ pg. 4) to view | |
| the output from your VCR, the TV broadcast being |
| recorded disappears.) |
| ● If you are using the AV connection (☞ pg. 4) to view |
| the output from your VCR, change the TV's input |
| mode from AV to TV. |
SELECT CHANNEL FOR
VIEWING
2 Use the TV’s channel selector to set the channel you want to watch.
Display Elapsed Recording
Time
| 1 |
| RESET COUNTER TO ZERO |
| Before recording starts, press C.RESET. The counter | ||
|
| resets to zero and displays the exact elapsed time as the | |
|
| tape runs. | |
|
|
| DISPLAY ELAPSED TIME ON |
| 2 |
| SCREEN |
| During recording, press OSD at any time to see the | ||
|
| elapsed time. | |
|
| All indications corresponding to the current status of the | |
|
|
| VCR are displayed for 5 seconds. The counter display |
|
|
| remains on the screen indicating the elapsed time. |
|
|
| Press OSD again to remove the display. |
|
|
|
|
|
|
| ● Make sure "SUPERIMPOSE" is set to "ON" (☞ pg. 20). |
|
|
| ● The indications are not recorded. |
|
|
| ● Each time you press OSD, the indication on the front |
|
|
| display panel will also change as follows: counter |
|
|
| reading = channel number = clock time. (Channel |
|
|
| number is not displayed during playback.) |
|
|
|
|
