JVC HR-J313EU specifications Timer Warning, Satellite Tuner Users

VPS/PDC

STOP+/–

PROG 1

1

4

7

2	DAILY
	3

5 6

8 9

0

?

2

WEEKLY

4

			EN	23
4		SET VPS/PDC MODE
	Press VPS/PDC to select "ON" or "OFF".
	If "VPS/PDC ON" is displayed on the screen or "VPS/
		PDC" is lit on the display panel, VPS/PDC is set to ON.
	If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"
		is not lit on the display panel, VPS/PDC is set to OFF.
	☞ "VPS/PDC Recording" on page 25.
5		RETURN TO NORMAL SCREEN
	Press PROG or OK. "PROGRAM COMPLETED" appears
		on the screen for about 5 seconds, then normal screen
		appears.
		● Repeat steps 1 – 5 for each additional programme.
6		ENGAGE RECORDER’S TIMER MODE
	Press ä (TIMER). The recorder turns off automatically
		and ä appears on the display panel.
		● To disengage the timer, press ä (TIMER) again.

NOTES:

● To Change The Stop Time . . .

3 OK

Satellite Tuner Users

To timer-record a satellite broadcast using SHOWVIEW:

. . . press STOP +/– after pressing OK in step 3. You can compensate for anticipated programme schedule delays this way.

● To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

● You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 26).

● It is not possible to timer-record a TV programme with a SHOWVIEW number which starts with "0".

1Set "AV2 SELECT" to "AV2" (☞ pg. 31).

2 Perform steps 1 – 6.

3 Set the satellite tuner to the appropriate channel before the selected programme begins.

4 Leave the satellite tuner's power on.

ATTENTION

Regarding Guide Program Number Set

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on screen to tell you that the recording is to start in 5 minutes.

–WARNING– TIMER RECORDING

TO START SOON

[]

"GUIDE PROG SET" appears after performing step 3 if the Guide Program number for the SHOWVIEW number you entered has not been set.

●Press the NUMBER keys or %Þ to input the channel position number on which your recorder receives that station, then press OK or #to set the Guide Program number. The SHOWVIEW program screen appears.

NOTES:

●The warning only appears if

you’re not in the Timer mode at that time.

●If this recorder is being used as the player for tape dubbing, the warning screen is recorded on the tape in the other video recorder.

GUIDE PROG SET

GUIDE PROG	TV PROG
2	– –
[5°] =
[PROG] : EXIT

(Ex.) To timer-record a ZDF programme with SHOWVIEW.

*If your recorder receives ZDF on the channel position 2, press OK or # after entering "2".

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press .