EN
31
TV Receiver | Player | Your recorder | Recorder | Your recorder | TV Receiver | |||||
|
|
|
|
| ENTREE |
|
| ENTREE |
|
|
|
|
|
|
| ANT. IN |
|
| ANT. IN |
|
|
|
|
| AV2 ENTREE/DECODEUR | AV1 ENTREE/SORTIE | ANTENNE | ENTREE/DECODEUR | ENTREE/SORTIE | ANTENNE |
|
|
|
|
| IN/DECODER | IN/OUT | SORTIE | AV2 IN/DECODER | AV1 IN/OUT | SORTIE |
|
|
|
|
|
|
| RF OUT |
|
| RF OUT |
|
|
|
|
|
|
|
|
|
|
| ||
VIDEO |
| (not provided) |
|
|
|
| RF Cable |
| ||
|
|
|
|
|
|
| VIDEO | |||
CHAN- | RF Cable |
|
|
|
| (not provided) |
|
| (provided) | |
NEL or |
|
|
|
|
|
|
|
| CHANNEL | |
AV mode | (provided) |
|
|
|
|
|
|
| or AV | |
|
|
|
|
|
|
|
|
|
| mode |
|
|
| Another recorder |
| Another recorder |
|
|
| ||
|
| Recorder |
|
|
| Player |
|
|
|
|
AV2 SELECT Setting
1 Press MENU to access the Main Menu screen. | MODE SET |
2Press %Þ to move the highlight bar (pointer) to "MODE SET", then press OK or #.
3 Press %Þ to move the highlight bar (pointer) to "AV2 SELECT". | B. E. S. T. | ON | ||
PICTURE CONTROL | AUTO | |||
4 Press OK or #to select "AV2", "DECODER" or "SAT". | AUTO TIMER | OFF | ||
: To use this recorder as the recording deck with the player connected to the | O. S. D. | ON | ||
DIRECT REC | ON | |||
| AV2 IN/DECODER connector, or to use the satellite tuner connected to the | POWER SAVE | ON | |
| AV2 IN/DECODER connector. | AV2 SELECT | AV2 |
|
| NEXT PAGE |
| ||
|
| |||
[5°] = |
|
| ||
: To view a satellite programme with the TV set while the recorder is in Timer | [MENU] : EXIT |
|
| |
mode, in Stop mode, recording or turned off. (☞ pg. 32)
5Press MENU to return to normal screen.
●If you have a decoder connected to the AV2 IN/DECODER connector, be sure to set "AV2 SELECT" back to "DECODER" after editing.
●If you're not connecting a decoder to the AV2 IN/DECODER connector, leave "AV2 SELECT" set to "AV2".
●The default setting is "AV2"; if the recorder's memory backup has expired due to a power cut or because the AC was removed from the recorder, "AV2" will be automatically selected when the power is restored to the recorder. If you are using a decoder, be sure to set "AV2 SELECT" back to "DECODER".
