JVC HR-J313EU specifications Preset Download, Enu

Set the Video Channel to off manually. (☞ pg. 44)

2

[MENU] : EXIT

SET VIDEO CHANNEL

GUIDE PROG SET

PLEASE WAIT

[MENU] : EXIT

T-V LINK

PLEASE WAIT

● If "– –:––" appears on the display panel, refer to page 7.

● If you are using the on- screen display, the T-V LINK screen will appear. Then the GUIDE PROG SET screen will appear during Guide Program number set.

● If you press any button on the recorder or remote control while downloading is in progress, it will be interrupted.

[5°] = [MENU] : EXIT

Preset position on the display panel increases from "CH1"; do NOT press any button on the recorder or remote control until the display panel shows either the display as illustrated on page 7 or "– –:––".

AUTO SET T-V LINK

Press %Þ to move the highlight bar (pointer) to "T-V LINK" and press OK or #.

If you are referring to the on-screen display

Press %Þ

to select "CH – –" and press OK or #.

Press OK.

If you are referring to the front display panel

1

INITIAL SETTINGS (cont.)

When you connect the recorder and your TV via fully-wired

21-pin SCART cable (☞ pg. 3), you can set the recorder's tuner channels by downloading preset data from your TV instead of using the Auto Set Up function (☞ pg. 4). After downloading is completed, the recorder sets the clock and Guide Program number automatically. For details, refer to the instruction manual for your TV.

Perform steps 1 to 3 of "Auto Set Up" on page 4 and 5 before continuing.

PERFORM PRESET DOWNLOAD

6EN

Preset

Download

You can use this function only with the TV offering

T-V Link, etc.*

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link, DATA LOGIC or NEXTVIEWLINK via fully- wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.

1 2 3

4 5 6

7 8 9

0

1 ?

2

4

ENU

3

OK

NOTES:

●In the area where no TV station transmits a PDC signal, the recorder can perform neither auto clock set nor auto Guide Program number set.

●If there is a power cut, or if you press or MENU while downloading or set up is in progress, it will be interrupted; be sure to turn off the recorder power once and try again from the beginning.

●Auto clock may not function properly depending on the reception condition.

●When you perform T-V LINK function, be sure to use fully- wired 21-pin SCART cable.

●On this recorder, the characters available for station’s name

(ID) are A–Z, 0–9, –, *, + and (space). Some downloaded station’s name may differ from those of your TV (☞ pg. 39).