![](/images/new-backgrounds/1133245/1332455x1.webp)
INSTALLING
YOUR
NEW
RECOR
D
ER
EN
3
Basic Connections
It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.
CHECK CONTENTS |
Make sure the package contains all of the accessories |
1 listed in “Specifications” (☞ pg. 51). |
SITUATE RECORDER |
Aerial terminal
Back of TV
RF Cable (provided)
Mains Power
Cord
TV Aerial Cable
2 Place the recorder on a stable, horizontal surface. | ||
|
| CONNECT RECORDER TO |
3 |
| TV |
The connection method you use depends on the type of | ||
| TV you have. | |
|
| |
| RF CONNECTION | |
|
| ● To Connect To A TV With NO AV Input Terminals . . . |
|
| a– Disconnect the TV aerial cable from the TV. |
|
| b– Connect the TV aerial cable to the ANT. IN jack |
|
| on the rear panel of the recorder. |
|
| c– Connect the provided RF cable between the RF. |
|
| OUT jack on the rear panel of the recorder and the |
|
| TV’s aerial terminal. |
AV CONNECTION
●To Connect To A TV With AV Input Terminals . . .
a– Connect the aerial, recorder and TV as per “RF
CONNECTION”.
b– Connect an optional SCART cable between the
AV1 IN/OUT socket on the rear panel of the recorder and the TV’s
|
| ENTREE |
|
| ANT. IN |
AV2 ENTREE/DECODEUR | AV1 ENTREE/SORTIE | ANTENNE |
IN/DECODER | IN/OUT | SORTIE |
|
| RF OUT |
Rear view
Mains outlet | AV1 IN/OUT |
|
CONNECT RECORDER TO MAINS
4 Plug the end of the mains power cord into a mains outlet.
Make AV connection if your TV has a
After you plug the mains power cord into a mains outlet, the Country Set display appears on the TV screen and/or on the
recorder's front display panel when the button on the recorder/remote control is pressed for the first time to power on the recorder; go to page 4 to perform Auto Set Up.