JVC HR-J245EK Override Automatic Tracking, Adjust Tracking, Manually, Return to Automatic

14

PLAYBACK (cont.)

Manual Tracking

¢ ¢

q

Á 1

TV PROG.

1	2	3	REVIEW
4	5	6
7/	8	9
	0		4

2

TV PROG.

1 3 Á

¦ 7 8

1	4	¢
	3

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG. buttons.

OVERRIDE AUTOMATIC

TRACKING

1	Press	on the remote to engage manual tracking.
	ADJUST TRACKING
2	MANUALLY
	Press TV PROG. + or – to adjust tracking.
	RETURN TO AUTOMATIC
	TRACKING
	Press	on the remote to re-engage automatic
3 tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT

REVIEW

1 Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

The front display panel tells you how many programmes have been recorded. If you have, for example, 3 programmes, “REVIEW” and "3" appear and blink. To watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTE:

Instant ReView is not possible while the recorder is in the Timer mode.