JVC HR-J245EK Revise Programme, Information, Check And Cancel Programmes, Timer Warning

26

TIMERRECORDING(cont.)

Check And Cancel Programmes

¢ ¢

q

Á 1

TV PROG.

1	2	3
4	5	6
7/	8	9	CANCEL

0 4

PROG. CHECK

2

TV PROG.+/–

START+/–

1 3 Á

		ACCESS PROGRAMME
1		DISPLAY AND/OR SCREEN
		Press PROG. CHECK.
		● The display panel shows the programme start time.
		Pressing OK changes the display to the programme
		stop time, then the date and preset position.
		● If the recorder is turned on and the TV is set to its
		VIDEO channel or AV mode, you can check program
		information on screen as well.
		● Each time you press PROG. CHECK, the next
		programme's information appears.
		If All Information Is Correct . . .
		. . . programming is completed.
		If You Wish To Revise Data . . .
		. . . with the recorder's power turned on, go to step 2.
		If You Wish To Cancel A Program . . .
		. . . with the recorder's power turned on, press CANCEL.
		All information you input is deleted.
		REVISE PROGRAMME
2		INFORMATION
		Input the appropriate data using the START +/–, STOP
		+/–, DATE +/– and TV PROG. +/– buttons on the
	remote control.

		–	8
¦ 7
1	4	STOP+/	¢
	3

OK

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on screen to tell you that the recording is to start in 5 minutes.

–WARNING– TIMER RECORDING

TO START SOON

[CANCEL]

NOTES:

●The warning only appears if

you’re not in the Timer mode at that time.

●If this recorder is being used as the player for tape dubbing, the warning screen is recorded on the tape in the other video recorder.

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press CANCEL.