JVC HR-J645ES, HR-J645EK, HR-J245EK, HR-J246EK S.T. Picture System, Return to Normal, Recording

20RECORDING(cont.)

B.E.S.T. Picture System

Turn on the TV and select the VIDEO channel (or AV mode).

¢ ¢

q

Á 1

1 2 3

4 5 6

7/ 8 9

0 4

2	PLAY
1	3	Á
¦	7	8
RECORD	4	¢
1
MENU		PUSH JOG
3
OK

Display Panel Indication

As the tape check progresses, the “– –” marks on the display panel increase upward. Once the "BEST" indicator starts blinking, the check is complete.

The B.E.S.T. (Biconditional Equalised Signal Tracking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures. The default setting for both recording and playback is “ON”.

Recording

1		LOAD A CASSETTE
		Insert a cassette with the record safety tab intact.
		● The recorder power comes on automatically.
		ACCESS MAIN MENU
2		SCREEN
		Press MENU twice.
		ACCESS MODE SET
3		SCREEN
		Move the highlight bar	MAIN MENU
		(pointer) to "MODE SET"
			MODE SET
		by pressing PUSH JOG
			AUTO CH SET
		%Þ, then press OK.	MANUAL CH SET
			GUIDE PROG SET
			CLOCK SET
			[5°] =
			[MENU] : EXIT
4		CONFIRM B.E.S.T. STATUS
		The default setting is	MODE SET
		“ON”. If this is the case,
			AUTO TIMER	: OFF
		go to step 4. If not, press
			O. S. D.	: ON
		PUSH JOG to move the	B. E. S. T.	: ON
	Þ
	highlight bar (pointer) to
	“B.E.S.T.”, then press
	PUSH JOG%to set to
	“ON”.
			[5°] = [5] : ON/OFF
			[MENU] : EXIT
		RETURN TO NORMAL
5		SCREEN
		Press MENU.
6		START RECORDING
		Press and hold RECORD and PLAY on the remote, or
	RECORD on the recorder.
		● The recorder spends approximately 7 seconds
		assessing the condition of the tape, then begins
		recording.
		● When the "BEST" indicator begins blinking, that
		means adjustment is complete.
		● Pressing the recorder's RECORD button while "BEST"
		is displayed does not start Instant Timer Recording
		(☞ pg. 19).