JVC HR-J7004UM manual Simple Recording, Select Recording Channel, Set Tape Speed, Start Recording

12SIMPLEPLAYBACKANDRECORDING (cont.)

Simple Recording

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

REC	PLAY
ª	£
q
2 5/8 3
CH	STOP/EJECT

ENTER

	1	2	3
NUMBER	4	5	6
	7	8	9
		0
	V/VCR		CH

1

2

3

4

5

6

LOAD A CASSETTE

Make sure the record safety tab is intact. If not, cover the hole with adhesive tape before inserting the cassette.

SELECT RECORDING

CHANNEL

Press CH5°. Or press the appropriate NUMBER keys, then press ENTER. (The channel changes after a few seconds whether you press ENTER or not.)

●If you use the RF connection, by pressing the TV/VCR button, select VCR mode to view the program to be recorded.

SET TAPE SPEED

Press SP/EP to set the recording speed.

START RECORDING

Press and hold REC and press PLAY on the remote control, or press REC on the VCR's front panel.

B.E.S.T. takes place at the beginning of both the first SP and the first EP recording after inserting the cassette (☞ pg. 23).

PAUSE/RESUME

RECORDING

Press PAUSE. Press PLAY to resume recording.

●During record pause, you can change the recording channel by using the CH5°buttons or NUMBER keys.

STOP RECORDING

Press STOP or STOP/EJECT. Then press STOP/EJECT to remove the cassette.

SP/EP

PLAY

PAUSE

REC

STOP

Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the VCR.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its record safety tab.

To record on it later, cover the hole with adhesive tape.

Record safety tab