JVC HR-J7004UM manual SET Program Information, Engage Timer Mode

	PUSH JOG	OK
	ª	£
	q
	2 5/8 3
MENU	CH

POWER

	UMBER1	2	3
	"8"	5	6
NUMBER	4
				NUMBER "9"
	7	8	9

CANCEL	0	TIMER
		CH

OK

MENU

PUSH JOG

EXAMPLE
If you program the VCR to timer	PROGRAM 1
record a show on September 6
	DATE	9/ 6 SAT
on channel 40 from 12:00 noon
to 1:00 PM in SP mode, the	START	12:00 PM
	STOP	1:00 PM
screen will look like this:	CHANNEL	40 SP

PRESS NUMBER KEY(0-9)

OR (5,°), THEN (OK)

PRESS (MENU) TO END

NOTES:

●To disengage the timer before recording starts, press TIMER again. Pressing once more re-engages it.

●In case of a power failure after programming, the VCR’s memory backup keeps your selections (if the lithium battery is not exhausted).

●If you select "PROGRAM SET" without having set the date and time, an error message appears. Follow its instructions.

●If you enter a start time that has already passed, ERROR appears on the screen and flashes.

●Programs that start after midnight must have the next day’s date.

●After timer recording is completed, the VCR’s power goes off automatically.

		29
	SET PROGRAM
5	INFORMATION
	Press the appropriate NUMBER keys to set the date,
	start/stop time and channel number. Press CH5° or
	PUSH JOG%Þ to set AM/PM and tape speed. Then
	press OK after AM/PM, channel number and tape speed
	settings. The next setting that can be set begins flashing.
	● Any information comprised of 1 digit (except the
	channel number) should have a "0" entered before it.
	● It is possible to set all information using the CH5° or
	PUSH JOG%Þ buttons. (In this case, press OK after
	each setting.)
	Do not use the CH ° or PUSH JOG Þbutton to set
	the date.
	● If you are using the Illumi-Guide feature, OK blinks
	when the following buttons are lit: NUMBER keys
	(0 – 9), PUSH JOG, CANCEL and MENU.

NOTES:

●If you are using a cable box, enter the cable box channel, not the channel to be recorded. The channel to be recorded must be selected on the cable box. (The cable box channel is the VCR's channel that displays the channels received by the cable box.)

●To timer-record cable or satellite channels through an external tuner connected to the VCR's external input connectors, press the NUMBER key "0" so that "AUX" appears instead of a channel number.

**You can record selected programs at the same time every weekday, or once a week. Before entering the month, press NUMBER key “8” (DAILY) or “9” (WEEKLY). Either "DAILY" or "WEEKLY" appears. Press again and "DAILY" or "WEEKLY" disappears.

6		MAKE CORRECTIONS
		To change any of the settings, press OK or PUSH JOG
		%%until the item you want to change begins blinking.
	Then set as in step 5.
		● If you are using the Illumi-Guide feature, OK blinks
		when the following buttons are lit: NUMBER keys (0
		– 9), PUSH JOG, CANCEL and MENU.
		RETURN TO NORMAL
7		SCREEN
		Press MENU as many times as necessary.
		● Press just once to access the Auto Timer screen
		(☞ pg. 32).
		● If you are using the Illumi-Guide feature, all buttons
		go out.
		ENGAGE TIMER MODE
8 Press TIMER. The VCR turns off automatically.

●You can program the timer while a regular recording is in progress; the on-screen menu will not be recorded.

●If the end of tape is reached during timer recording, the cassette is automatically ejected.

●When timer-recording cable or satellite channels through an external tuner, be sure to keep the Cable Box or satellite

receiver's power ON.