JVC HR-J7004UM Edit From a Camcorder, SET RECORDER’S Input, Mode, Access Special, Function Screen

34

EDITING(cont.)

Edit From A Camcorder

Recorder Your VCR

ª £

q

2 5/8 3

To rear panel PAUSE/AV

COMPU-LINK connector

VIDEO	AUDIO	Mini-plug cable (not supplied)
	IN
IN		(JVC camcorder only)

VIDEO

OUT

Camcorder AUDIO OUT

EDIT

Player

1	2	3
4	5	6
7	8	9
NUMBER "0"	0

CH

OK

MENU

You can use a camcorder as the player and your VCR as the recorder.

MAKE CONNECTIONS

1 Connect an AV cable (not supplied) between the camcorder’s VIDEO OUT and AUDIO OUT connectors and your VCR’s VIDEO IN and AUDIO IN connectors.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling your VCR. The Mini-plug cable is a mono 3.5 mm mini-plug to mono 3.5 mm mini-plug connector.

●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO IN L connector on your VCR.

LOAD A CASSETTE
Insert the cassette to be recorded on into your VCR and
2 the playback cassette into the camcorder.
SET RECORDER’S INPUT
MODE
3 Press NUMBER key “0” to set your VCR to AUX.
ACCESS MAIN MENU
SCREEN
4 Press MENU.
ACCESS FUNCTION SET
SCREEN
Press CH5° or PUSH JOG%Þ to place the arrow next
to “FUNCTION SET”, then press OK.
5 If you’re using a JVC Master Edit Control-equipped
camcorder — step 6
If not — step 9
ACCESS SPECIAL
FUNCTION SCREEN
Press CH5° or PUSH JOG%Þ to place the arrow next
6 to “SPECIAL FUNCTION”, then press OK.
SELECT MODE
Press CH5° or PUSH	SPECIAL FUNCTION
JOG%Þ to place the	=PAUSE
7 arrow next to ”PAUSE”.
	AV COMPU-LINK
	PRESS (5,°) TO SELECT
	PRESS (MENU) TO END

PUSH JOG