22 EN | BASIC PLAYBACK AND RECORDING (cont.) |
Basic
Playback
Features
A Changing display information
Press DISPLAY during playback.
Each time you press the button, the front display panel shows the time counter, tape remaining time and the clock time in sequence.
Time Counter |
|
| Tape Remaining Time |
|
| ||
|
|
|
|
POWER
VIDEO |
SP | EP | |
| VCR |
| STOP/EJECT | |
| ( 7/ 0) | |
| REW | FF |
| MENU |
|
CH | REC | STOP/EJECT PAUSE |
| OK |
|
Clock Time
c To display the VCR status including the time counter and the clock time on the TV screen, see “Showing on- screen display” (Z pg. 27).
c "COUNT" appears on the screen when the time counter is shown. "REMAIN" appears on the screen when the tape remaining time is shown.
c The approximate tape remaining time appears and the "
" indicator lights on the front display panel.
D
F
c The tape remaining time is calculated based on the tape speed (SP or EP) being used. The indicated remaining time is only an estimate.
To reset the time counter, press C. RESET on the
Remote. The counter reading becomes “0:00:00”. It is also reset when a tape is inserted.
Checking tape position
E | 1 | 2 |
| ||
| 4 | 5 |
| 7 | 8 |
C. RESET |
| 0 |
1
A
3
2
6
9
F
D
B
The tape position indicator |
|
|
|
|
appears on screen in the |
|
|
|
|
following cases: |
|
|
|
|
c When you change the VCR |
|
|
|
|
operation mode from the | B | + + + |
| E |
| ||||
stop mode to fast forward or |
|
|
|
|
rewind mode. |
| COUNT | 0:33:27 | |
c When you perform an Index |
|
|
|
|
Search (Z pg. 24) or Instant Review (Z pg. 24).
The position of “ 
” in relation to “B” (Beginning) or “E” (End) shows you where you are on the tape.
F | C |
F 
STOP ( 7 )
NOTES:
c "SUPERIMPOSE" must be set to “ON”, or the indicator will not appear (Z pg. 38, 39).
c It may take a few seconds for the tape position indicator to be displayed.
C Playing back tape repeatedly
—Repeat Play
You can play back a tape repeatedly (100 times).
While playing back a tape, press and hold PLAY ( 3) for more than 5 seconds.
The play indicator ( # ) on the front display panel starts flashing slowly, and a tape will be played back 100 times.
To stop playback, press STOP ( 7) on the Remote or STOP/EJECT ( 7 / 0) on the front panel.
22 | 00.1.31, 9:57 AM |
