JVC HR-S3800U manual Audio Dubbing, Source Select input mode, Set Edit Function to A. DUB

EN 47

Audio Dubbing

(ONLY FOR HR-S4800U)

Connection

This VCR (for playback)

REWFF

POWER	MENU
	PLAY
S-VIDEO	VIDEO (MONO)L—AUDIO—R

S-VHS ET	SP	EP	CH
		VCR		REC	STOP/EJECT	PAUSE
				OK

To AUDIO IN	Audio cable
	(not supplied)

To Audio output

CD player

(astheaudiosource)

c Audio Dubbing is also possible using the audio input connectors on the rear panel.

You can replace sounds recorded on the normal track with new sounds — for example, your favorite song played back on the CD player.

c Refer also to the other audio component’s instruction manual for connection and its operations.

Normal track

Before audio dubbing

Video and

Hi-Fi track

After audio dubbing

1	Make connections
	Connect an audio cable between the VCR’s audio

input connectors and the audio component’s audio output connectors.

c If the audio component is monaural, connect the AUDIO L (MONO) input connector on the VCR.

2	Load a cassette and prepare the audio
	source
3
	Select input mode
	Select “F-1” — when connecting the audio
		component to the audio input connectors on
		the front panel.
	Select “L-1” — when connecting the audio
		component to the audio input connectors on
		the rear panel.
	On the front panel:
	Press CH5°.
	On the Remote:
	Press the Number key "0 (AUX)" or CH +/Ð.
4
	Set “EDIT FUNCTION” to “A. DUB”
	Follow the procedure described on pages 38 and 42.
	c Make sure to set “EDIT FUNCTION” to “REC-
		PAUSE” after you finish editing tapes. This
		cancels the editing function.
5
	Locate start point
	1 Press PLAY ( 3) to start playback.
	2 Press PAUSE ( 8) when you find the beginning
		of the scene for which you want to audio-dub.
6
	Activate editing mode
	Press REC ( ƒ) on the front panel.
	c The VCR enters the Audio Dubbing pause mode.
	c	blinks,	and	light up on the front
		display panel.
7
	Start audio dubbing
	Press PLAY ( 3 ) on this VCR and start playing
	the audio source.
	c	blinks and	is displayed on the front
		display panel.

To stop audio dubbing

Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.

c Audio dubbing automatically stops when the counter reading becomes "0:00:00", and the VCR starts normal playback.

NOTES:

c During Audio Dubbing, the sound recorded on the normal track is selected as the monitor sound. If you want to listen to the Hi-Fi or mixed sound (Hi-Fi sound and monaural sound), see "Selecting monitor sound — Audio Monitor" (Z pg. 23).

c Audio Dubbing cannot be performed on a tape with its record safety tab removed.

c When playing back an audio-dubbed tape, select the sound you want. See "Selecting monitor sound — Audio Monitor" (Z pg. 23).

c Picture may be distorted if you pause Audio Dubbing.

HR-S4800U/S3800U-EN44-53 47 00.1.31, 10:03 AM