JVC HR-S3800U manual Basic Recording, Select recording channel, Set tape speed, Start recording

EN 25

Basic

Recording

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

			SHUTTLE ring
POWER		PLAY ( 3 )
		4
			REW
POWER			MENU
			PLAY
S-VIDEO VIDEO (MONO)L—AUDIO—R
S-VHS ET	SP EP	CH
	VCR		REC STOP/EJECT	PAUSE
			OK
		2
		STOP/EJECT
			( 7/ 0)
			PAUSE ( 8 )

POWER

TV/VCR

1	2	3
			2
4	5	6	2 –b
7	8	9

2 Select recording channel
	On the front panel:
	Press CH5°.
	On the Remote:
	a–	Press CH + or Ð.
		or
	b–	Press the Number keys.
	c If you connect the TV and the VCR only using
	the RF connection, press TV/VCR on the Remote
	so that the VCR mode indicator lights on the front
	display panel, to view the program to be recorded.

3	Set tape speed
	Press SP/EP to set the recording speed.
4
	Start recording

On the front panel:

Press REC ( ƒ).

On the Remote:

While holding REC ( ƒ), press PLAY ( 3).

c If “VIDEO CALIBRATION” is set to “ON” (default setting: Z pg. 39), this VCR checks the tape condition for about seven seconds, then starts recording. This means that the first seven seconds of the program will not be recorded. If this is inconvenient for you, follow the steps below:

1Press REC ( ƒ) and PAUSE ( 8) to start Video Calibration.

2Then press PLAY ( 3 ) to start recording after Video Calibration is complete.

To pause recording

1

REW ( 1 )

4

0	4
	2 –a

3

FF ( ` )

PAUSE ( 8 )

STOP ( 7 )

Press PAUSE ( 8). To resume recording, press PLAY ( 3 ).

To stop recording

Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.

To rewind the tape (when it is not running)

Press REW ( 1 ) (or turn the SHUTTLE ring on the front panel to the left).

To fast-forward the tape (when it is not running)

Press FF ( ` ) (or turn the SHUTTLE ring on the front panel to the right).

To eject the tape

Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running.

This VCR can check the tape condition during recording (and playback), and realizes the best possible pictures.

1	Load a cassette
	Make sure the record safety tab is intact. If not,

cover the hole with adhesive tape before inserting the cassette.

c You can also eject the cassette with the VCR turned off.

To turn off the VCR

Press POWER.

It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.

HR-S4800U/S3800U-EN21-29 25 00.1.31, 9:57 AM