![](/images/new-backgrounds/1126238/12623837x1.webp)
EN 19
Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.
2Access Main Menu screen on VCR
3Press MENU.
Access Initial Set screen
Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to “INITIAL SET”, then press OK or
4SHUTTLE PLUS #.
Access DBS Receiver Set screen
1 2 3
2
4 5 6
7 8 9
04
Press SHUTTLE PLUS %fi to move the highlight bar (arrow) to
“DBS RECEIVER SET”, then press OK or
5SHUTTLE PLUS #.
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH GUIDE CHANNEL SET CABLE BOX SET
=DBS RECEIVER SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
1
2 34
– 5
Setting DBS receiver output channel & brand
After installation, set the DBS receiver’s output channel and its brand correctly; otherwise, the Controller cannot work1correctly.
Turn on DBS receiver
Select a channel other than channel 55, 100 or 205 on your DBS receiver.
Select DBS receiver output channel
Your selection depends on how your DBS receiver is connected to your VCR.
●If your DBS receiver
is connected to your VCR’s ANTENNA IN terminal on the rear
Press SHUTTLE PLUS %fi on the Remote until the channel number representing the DBS receiver’s output (CH3 or CH4) appears on the screen.
●If your DBS receiver is connected to your VCR’s AUDIO/VIDEO IN connectors on the front panel Press SHUTTLE PLUS %fi on the Remote until “ON
●If your DBS receiver is connected to your VCR’s AUDIO/VIDEO IN connectors on the rear panel Press SHUTTLE PLUS %fi on the Remote until “ON
●If you do not use a DBS receiver
Press SHUTTLE PLUS %fi on the Remote until “OFF” appears on the screen.