JVC HR-S5900U Access Cable Box Set screen, Select cable box output channel, Turn on cable box

CABLE BOX SET

OFF

PRESS (5,∞), THEN (OK)

PRESS (MENU) TO END

16 EN					INITIAL SETTINGS (cont.)
Turn on the VCR and the TV, and select the VCR					Access Main Menu screen on VCR
channel 3 or 4 (or AV mode) on the TV.					32Press MENU.
				7	Access Initial Set screen
					Press SHUTTLE PLUS %fi to move the highlight
					bar (arrow) to “INITIAL SET”, then press OK or
					4SHUTTLE PLUS #.
					Access Cable Box Set screen
1	2	3			Press SHUTTLE PLUS	INITIAL SET
			2		%fi to move the
4	5	6				CLOCK SET
					highlight bar (arrow) to
						LANGUAGE	ENGLISH
7	8	9			“CABLE BOX SET”,	GUIDE CHANNEL SET
						=CABLE BOX SET
	0				then press OK or	DBS RECEIVER SET
			4		5SHUTTLE PLUS #.	SELECT WITH (5,∞) AND (OK)
						PRESS (MENU) TO END

Select cable box output channel

1

2	3467
	– 5

Setting cable box output channel & brand

Your selection depends on how your cable box is connected to your VCR.

●If your cable box is

connected to your VCR’s ANTENNA IN terminal on the rear

Press SHUTTLE PLUS %fi on the Remote until the channel number representing the cable box’s output (CH2 – CH9) appears on the screen.

●If your cable box is connected to your VCR’s AUDIO/VIDEO IN connectors on the front panel Press SHUTTLE PLUS %fi on the Remote until “ON F-1 (FRONT)” appears on the screen.

●If your cable box is connected to your VCR’s AUDIO/VIDEO IN connectors on the rear panel Press SHUTTLE PLUS %fi on the Remote until “ON L-1 (REAR)” appears on the screen.

After installation, set the cable box output’s channel and its brand correctly; otherwise, the Controller cannot work1correctly.

●If you do not use a cable box

Press SHUTTLE PLUS %fi on the Remote until “OFF” appears on the screen.

Turn on cable box

Select a channel other than channel 9 on your cable box.