36 EN | TIMER RECORDING (cont.) |
24HR Quick Programing
JOG dial
| REW | FF |
| PLAY |
|
POWER | – | + |
PUSH / TURN
| REC LINK | A.DUB |
|
|
S VIDEO | VIDEO |
| 24HR QUICK |
|
|
|
| PROGRAM |
|
| INSERT | REC | PAUSE STOP/EJECT |
24HR QUICK PROGRAM
NOTES:
●If “Err” appears on the display panel, repeat the steps again.
●When a menu screen is shown, you cannot use 24HR quick programing function. Press MENU to return to normal screen, and try again.
●You can use 24HR quick programing function also when the VCR is turned off.
●For 24HR quick programing function, the program overlap warning display does not appear even if some programs overlap each other.
●Even if a power failure occurs, the VCR keeps your timer programs. However, the clock time, channel settings, and other menu settings are lost.
As a result, when the power is supplied again to this VCR after the power failure, the following will take place.
1.This VCR starts the Plug & Play setting automatically to restore the clock time and channel setting.
2.If the clock time and channel setting are restored correctly, each timer program you have made will start at its start time unless its end time has elapsed.
You can program a timer recording that starts within 4 hours. Up to 8 timer recording programs can be
made as far as a year in advance. Remember, the clock must be set before you can program the timer ( pg. 8 or10).
Load a cassette
Make sure the record safety tab is intact. If not, cover the hole with adhesive tape, then load it into the VCR.
●The VCR turns on, and the counter is reset,
2automatically.
Access 24HR quick program display.
Push 24HR QUICK PROGRAM. “
” and start
3time start blinking on the display panel. Program start time indicator
Set program start time
Turn the JOG dial to the left or right. Then, push the JOG dial. “
” and start time start blinking on
the display panel.
Program start time indicator
●One click stop of the JOG dial changes the
4time in
Set program stop time
Turn the JOG dial to the left or right. Then, push the JOG dial and channel number will start
blinking. | Program stop time indicator | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
●One click stop of the JOG dial changes the
5time in
Timer warning display
Set channel number
Turn the JOG dial to the left or right.
A warning appears on the TV screen to tell you that the
TIMER RECORDING
TO START SOON (CANCEL)
the display, press
●You can cancel the setting at any time by pressing and holding the JOG dial for more
6than 3 seconds. Repeat from the step 3.
Engage timer recording standby mode
Press 24HR QUICK PROGRAM.
The VCR turns off automatically and “‰” is displayed on the front display panel.
