DISPLAY
C. RESET
TV | PROG | RECORD |
| ||
|
|
15
Record One Programme While Watching Another
SELECT PRESET TO WATCH
1 Once recording is in progress, all you need to do is to set the preset controls on the TV for the station you wish to view.
●The programme selected with the TV’s preset controls appears on the TV screen while the one selected with the recorder's TV PROG buttons is recorded on the tape.
Elapsed Recording Time
Indication
1 2 3
4 5 6
7 8 9
00000
1 | ? |
3
–
2
4
You can check the exact time of a recording.
SET COUNTER DISPLAY
1 Press DISPLAY (or –
RESET COUNTER
2 Press C. RESET (or 0000) before starting recording or playback.
●The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs.
Instant Timer Recording (ITR)
This easy method allows you to record for any length of time from 30 mins. to 6 hours (selectable in
START RECORDING
1 Press RECORD on the recorder.
Tape Remaining Time
DISPLAY REMAINING TIME
1 Press DISPLAY (or –
●The display panel shows the tape remaining time with "
" displayed.
●By pressing the DISPLAY (or –
*Preset position is not displayed during playback.
NOTE:
Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "–
ENGAGE ITR MODE
2 Press RECORD again. "
" blinks and 0:30 appears on the front display panel.
SET RECORDING
DURATION
3 If you want to record for more than 30 minutes, press RECORD to extend the time. Each press extends recording time by 30 minutes.
NOTE:
You can only perform ITR using the RECORD button on the recorder's front panel.
