JVC HR-S6600EK setup guide Display Panel, # $

55

DISPLAY PANEL

1 2 3 45 6 7 8

	REVIEW
	SP
VPS/PDC	VCR

9 0 ! @ # $

1B.E.S.T. Picture System Display lights from bottom to top while B.E.S.T. is active. ☞ pg. 22

2Symbolic Mode Indicators

	STILL:
PLAY:	SLOW:
FF/REW VARIABLE	RECORD:
SEARCH:
	RECORD PAUSE:

3Tape Speed Indicators display mode of record-

ing; light during Record or Play mode. ☞ pg. 14

* EP is only for NTSC playback.

4Programme Time Indicators show the

programme start time () and the programme stop time () for timer-recording. ☞ pg. 16

5"Timer" Indicator lights when has been pressed to engage Timer mode. ☞ pg. 17, 19

6Tape Remaining Time Indicator displays time remaining on tape when certain buttons are pressed. ☞ pg. 15

7Channel Display shows preset position where the station currently being received is stored. Clock Display shows current time. ☞ pg. 10

8Instant REVIEW Indicator blinks after timer- recording and shows how many programmes have been timer-recorded.☞ pg. 25

9PDC Indicator lights when PDC has been engaged for timer recording. ☞ pg. 17, 19

*VPS (Video Programme System) recording is not currently available in the U.K. and not possible with this recorder.

0S-VHS Indicator lights when a cassette marked S-VHS is inserted with S-VHS mode set to "AUTO", and when an S-VHS recorded tape is played back. ☞ pg. 21

!VCR Indicator lights when the video recorder is in the video mode. At this point, the TV auto- matically enters AV mode. ☞ pg. 12

@"Cassette Loaded" Mark lights once a cassette is inserted; remains lit until cassette ejected.

#Counter shows time elapsed since playback or recording began.

With displayed, shows time remaining from current tape position to end of tape (☞ pg. 15).

Counter, Preset Position*, Clock and Tape Remaining Time Display appear alternately

when – –:– – is pressed.

* Preset Position is not displayed during playback.

$Mode shows external input mode selected (L-1, L-2 or S-1).