EN 39

Edit To Or From

Another Video

Recorder

A

 

 

 

 

TV receiver

Player

Your recorder

 

 

21-pin SCART cable

 

 

 

 

(not provided)

 

 

Video

RF cable

 

 

channel or

(provided)

 

 

AV mode

 

 

 

 

 

 

Another recorder

 

 

Recorder

 

 

B

 

 

 

 

Recorder

 

Your recorder

TV receiver

21-pin SCART cable

 

 

 

(not provided)

 

 

 

 

RF cable

 

Video

 

 

(provided)

channel or

 

 

 

 

AV mode

Another recorder

 

 

Player

 

 

 

 

Advantages of S-VHS video recorders

You can edit from VHS to S-VHS, S-VHS to VHS, or, from S-VHS to S-VHS.

From VHS to S-VHS: Record VHS playback signals in the S-VHS mode. Although the picture quality is inherently limited by that of the original, the edited tape has better picture quality than those made by VHS-to-VHS editing.

From S-VHS to VHS: Because the picture quality of the source material is very high, the edited tape has better picture quality than those made by VHS-to-VHS editing.

From S-VHS to S-VHS: All signals will be transferred with minimum degradation.

You can use your recorder as the source player or as the recording deck.

A Make connections.

Connect the player’s 21-pin SCART connector to the recorder’s 21-pin SCART connector as illustrated.

AWhen using your recorder as the source player ...

... connect its AV1 (L-1) IN/OUT connector to the recording deck.

BWhen using your recorder as the recording deck ...

... connect its AV1 (L-1) IN/OUT or AV2 (L-2) IN/

DECODER connector to the source player.

If another recorder is compatible with the Y/C signal ...

... when using your recorder as the source player, set “L-1 OUTPUT” to “S-VIDEO” ( pg. 40).

... when using your recorder as the recording deck, set “L-2 INPUT” to “S-VIDEO” ( pg. 41).

B Set the input mode of recording deck.

With this video recorder, press AUX (number key 0”) and/or PR to select “L-1” for the AV1 (L-1) IN/OUT connector, or “L-2” for the AV2 (L-2) IN/DECODER connector, depending on the connector being used.

When using another recorder as the recording deck, refer to its instruction manual.

When using the AV2 (L-2) IN/DECODER connector, set “L-2 SELECT” to “A/V” ( pg. 41).

C Set the edit mode.

See “PICTURE CONTROL” on page 47.

D Start the source player.

Engage the Play mode of the source player.

E Start the recording deck.

Engage the Record mode of the recording deck.

NOTES:

All necessary cables can be obtained from your dealer.

For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.

When you select “EDIT” to dub tapes in step 3, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

When you use this recorder as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting ( pg. 47).

If you are using another recorder with S-Video and Audio output connectors, connect its S-Video and Audio output connectors to this recorder’s front panel S-VIDEO and AUDIO input connectors. Then, set the recorder’s input mode to “S-1” in step 2.

Page 39
Image 39
JVC HR-S6850EU Another Video Recorder, Advantages of S-VHS video recorders, Set the input mode of recording deck