Masterpage:Right-Full-NoTitle0
EN 47
Filename [HRS6850EU4.fm]
Page 47 April 12, 2001 9:59 am
* The default setting is bold in the table below.
8B.E.S.T.
ON
OFF
You can set the B.E.S.T. (Biconditional Equalised Signal Tracking)
system to “ON” or “OFF” (墌pg. 25).
8PICTURE CONTROL
AUTO
: Provides the optimised
picture benefits of the B.E.S.T.
Picture System.
EDIT
: Minimizes picture
degradation during editing
(recording and playback).
SOFT
: Reduces image coarseness
when viewing overplayed
tapes containing a lot of noise.
SHARP
: Clearer, sharper-edged
picture when viewing images
with lots of flat,
same-coloured surfaces such
as cartoons.
This feature helps you to adjust the playback picture quality
according to your preference. Normally select “AUTO”.
NOTES:
●When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not
change until you select another mode.
●When you select “EDIT” to dub tapes, be sure to select “AUTO” after you
finish dubbing the tapes.
●When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches automatically
from “AUTO” to “NORM”.
8AUTO TIMER
ON
OFF
When this function is set to “ON”, the timer is automatically
engaged when the recorder power is turned off, and automatically
disengaged when the recorder is powered back on.
NOTE:
For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions
are disabled while the Timer mode is engaged. To disengage the timer, press
# (TIMER).
8O.S.D.
ON
OFF
When this function is set to “ON”, various operational indicators
appear on the TV screen. Messages appear in the selected language
(墌pg. 13, 14).
NOTES:
●When you use this recorder as the source player for editing, be sure to set
“O.S.D.” to “OFF” before starting.
●During playback, the operation mode indicators may be disturbed
depending on the type of tape being used.
HRS6850EU1.book Page 47 Thursday, April 12, 2001 10:16 AM