Filename [HRS6850EU2.fm]
Masterpage:Left
26 EN
Page 26 April 12, 2001 4:44 pm
TIMER RECORDING
SHOWVIEW® Timer ProgrammingYou can use the on-screen display to enter the SHOWVIEW
number.
AAccess the SHOWVIEW screen.
The front display panel looks like this:
BEnter the SHOWVIEW number.
The SHOWVIEW number you enter appears on the front display
panel with only a 4-digit number:
CAccess the SHOWVIEW Program screen.
The front display panel shows the programme start time. Pressing
" changes the display to the programme stop time, then the
date and channel position.
●If the number you entered is invalid, “ERROR” appears on the
TV screen and “Err” appears on the front display panel. Press
& and input a valid SHOWVIEW number.
●If the “GUIDE PROG SET” screen appears, see “ATTENTION”
on page 27.
Before performing the SHOWVIEW Timer
Programming:
●Make sure that the recorder’s built-in clock is set properly.
●Insert a cassette with the safety tab in place. The recorder
will come on automatically.
●Turn on the TV and select the video channel (or AV mode).
Press PROG.
Press the number keys to
enter the SHOWVIEW number
of a programme you wish to
record. Then press OK.
●If you make a mistake, press &
and input the correct number.
The SHOWVIEW Program
screen appears (if you’re just
starting out, “P1” appears).
IMPORTANT
Make sure the channel position number you wish to record is
displayed; if not, see “SHOWVIEW® System Setup” on page51
and set the Guide Program number correctly.
HRS6850EU2.fm Page 26 Thursday, April 12, 2001 4:44 PM