Masterpage:Right-NoTitle0

EN 11

Filename [HRS6850EU1a.fm]
Page 11 April 12, 2001 9:59 am
CSelect the language.

Press OK. The Language Set display appears on the front

display panel and/or on the TV screen.

On the front display panel

Press rt to select your language code.

(Example) DEUTSCH (02) is selected for SUISSE (41).
DPerform Auto Set Up.

Press OK. The AUTO SET/T-V LINK display appears on

the front display panel and/or on the TV screen.

On the front display panel

Press rt to select “Auto” and press OK or e.

●When you have connected the video recorder to a TV offering
T-V Link via a fully-wired 21-pin SCART cable (墌pg.9) and
the TV is turned on, the recorder automatically performs the
Preset Download (墌pg. 12) even if you select “Auto” for
Auto Set Up function.
NOTES:
●In the area where no TV station transmits a PDC (Programme
Delivery Control) signal, the recorder can perform neither
Auto Clock Set nor Auto Guide Program Number Set.
●If there is a power cut, or if you press 1 or MENU while Auto
Set Up is in progress, Auto Set Up will be interrupted; be sure
to turn off the recorder power once and try again from step 1.
●Auto Clock Set may not function properly depending on the
reception condition.
●If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by Auto Set
Up, the TV system setting for those channels may be incorrect.
Select the appropriate TV system for those channels
(墌pg. 55, “INFORMATION”).
Language Code
ENGLISH
DEUTSCH
FRANCAIS
ITALIANO
CASTELLANO
NEDERLANDS
SVENSKA
:
:
:
:
:
:
:
01
02
03
04
05
06
07
NORSK
SUOMI
DANSK
POLSKI
CEcTINA
MAGYAR
:
:
:
:
:
:
08
09
10
11
12
13
On the on-screen display

Press rt to move the

highlight bar (pointer) to the

language of your choice.

On the on-screen display

Press rt to move the

highlight bar (pointer) to

“AUTO SET” and press OK or

e.

“Auto” blinks on the front display panel; do NOT press

any button on the recorder or remote control until the

front display panel shows clock time, “(CH)1” or

“– –:– –” as illustrated on page 13.

International telephone
country code Language code
●If you are using the on-screen
display, the AUTO SET
screen will appear. As Auto
Set Up progresses, the “q”
mark on the TV screen
moves from left to right.
When the Auto Set Up is
completed, “SCAN
COMPLETED” appears for
about 5 seconds, then the
normal screen appears.
ATTE NT IO N
Once you have performed Auto Set Up, even if the recorder’s
memory backup has expired, all the stored stations and their
Guide Program numbers remain in the recorder’s memory
and the recorder will not perform Auto Set Up again. You
only need to set the clock. (墌pg.58)
If you have moved to a different area, perform each setting as
required.
●Video channel setting (for RF connection users) 墌pg.60
●Tuner setting 墌pg.52
●Clock setting 墌pg. 58
If a new station starts broadcasting in your area, perform
tuner setting (墌pg. 52) and, if necessary, video channel
setting (墌pg. 60).
Beginning End
HRS6850EU1.book Page 11 Thursday, April 12, 2001 10:16 AM